DL380p G8 RAID 1+0

HFMike — Mon, 26 Aug 2013 14:34:44 GMT

Hiya All,

New to these servers.

I'm trying to set up a Win 2008 Enterprise R2 Server

I'm going through the 'Intelligent Provisioning' to set this up

I set up my arrays as the guys want it

C: RAID 1

D: RAID 1+0

E: RAID 1+0

F: RAID 0

Problem I have is that if I configure all the drives as above, using either Recommeded or Customized then setup always tries to install to D:

IF I configure only the array that will be C: and do the install, it works until I go and setup the rest of the arrays - once I boot up into Windows I get prompted to initialize the other drives and am faced with only RAID 0, 1, or 5

Am I going to have to download all the drivers into a separate USB and do a manual install ?

Re: DL380p G8 RAID 1+0

HFMike — Mon, 26 Aug 2013 17:29:04 GMT

Is this even possible?

Re: DL380p G8 RAID 1+0

HFMike — Tue, 27 Aug 2013 12:05:41 GMT

Nevermind

I was apparantly brain dead yesterday

topic Re: DL380p G8 RAID 1+0 in Operating System - Microsoft

DL380p G8 RAID 1+0

Re: DL380p G8 RAID 1+0

Re: DL380p G8 RAID 1+0