Windows Update 2019.01 Proliant BL460c Gen8

RpDk — Wed, 06 Feb 2019 13:09:10 GMT

Hi all,

So - I am maintaining a small MS Hyper-V Cluster deployment based on two C7000 enclosures with a variety of BL460c Gen7 and Gen8 and 3 Nimble SAN's and I have a problem with the Windows Update 2019.01 for Windows 2016 Datacenter.

Cluster and Hyper-V configuration are managed by SCVMM 2016. The onboard NIC's are memberes of a team, used for Hyper-V VM traffic. A secondary NIC (not teamed) are dedicated to SAN traffic.

When installing the 2019.01 update, the team configuration are broken, leaving the Hyper-V rolse without network cconnectivity. I have tried to reconfigure the team and the virtual switch, both manually from SCVMM and from the Hyper-V server itself, but the configuration cannot be reconfigured to a working state.

The only solution I have found valid is to reinstall the server OS, install updates including the 2019.01 update and only after this update is installed, it is possible to configure the Hyper-V, Cluster and additional roles and add it to the SCVMM configuration with success.

Any advice to avoid reinstalling the servers will be appriciated.

topic Windows Update 2019.01 Proliant BL460c Gen8 in Operating System - Microsoft

Windows Update 2019.01 Proliant BL460c Gen8

Re: Windows Update 2019.01 Proliant BL460c Gen8