topic Re: Win 2016 server STD installation problem (ML 350 Gen10) standard version unknow... in Operating System - Microsoft

Win 2016 server STD installation problem (ML 350 Gen10) standard version unknow...

shellxy — Wed, 08 Apr 2020 09:03:53 GMT

Hello,

I'm installing actually a new server and i've a problem when INTELLIGENT PROVISIONNING detect my different OS (STD or DATACENTER).

INTELLIGENT PROVISIONNING dectect only DATACENTER Version. I can't install STD (I 've only a standard licence...)

I try SMB install, advanced install...all the time this probleme.

I use a DVDrom usb driver avec officiel HP WINDOWS INSTALL DVD.

Do you have a Idee?

SanjeevGoyal — Wed, 08 Apr 2020 16:46:03 GMT

Hello,

I hope all is well.

I would request you to request you update the server with the latest bios and firmware before OS installation.

Latest Bios:2.32

Latest iLO5 firmware:2.14

Follow the below latest Intelligent Provisioning:3.31 for installing the OS.

Intelligent Provisioning Recovery Media for Gen10

Intelligent Provisioning Recovery Media for Gen10 Plus

Try to install OS manually, if the issue still persists after following the above action.

Share the error code or snap.if the issue still persists.

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

sudhirsingh — Mon, 13 Apr 2020 16:46:39 GMT

Hi,

Try installing windows in manual method/outside Intelligent provisioning.

1. Enter into SSA and create Raid/logical drives.

2. Boot with OS media,

3. Browse and provide smart array controller driver if volume/drive does not show up.

4. Select the volume and proceed to install Windows.

Follow on screen instruction..

hope it helps!.

Regards,

Sudhir

shellxy — Wed, 15 Apr 2020 08:20:58 GMT

Ho, thx,

It s oK now