topic Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10 in Operating System - Microsoft

Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Xena_Angel — Fri, 25 Aug 2023 00:34:11 GMT

I have an HP Proliant DL360 Gen10 that I am trying to install Windows Server 2016. When I try to install the OS using assisted install or just boot from CD, I get an error when I choose a drive to install on. The error is "We couldn't create a new partition or locate an existing one. for more information, see the setup log files." The drivers are there. The firmware is updated to March 2023. The assisted install partitioned the drives and I can see the partitions and the raid1 configuration. But when I choose the Primary drive I get the error above. Looking through other posts it appears that the Windows Server 2016 OS is older than the SAS HPE EG000300JWEBF HPD5 drives and that I may need the Windows driver to support those drives at firmware revision HPD5. However, I have looked everywhere and I cannot find a driver. I went to the HPE Support Center and chose my server, the HPE Proliant DL360 Gen10 server, then click on Drivers and Software, select the Microsoft Windows Server 2016 and none of the software appears to be a Windows Server 2016 driver or those drives. Am I looking for the right thing in the right place? I ran the firmware update and I can see that both the drives and the controller are at the latest firmware revision.

If I am understanding the other articles correctly I need the driver for the hard drives I would then choose the load driver button when I am installing the OS, choose the driver to load, and then I should be able to choose the primary drive and complete the installation.

Any guidance you can provide would be greatly appreciated.

Query: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

support_s — Thu, 17 Aug 2023 17:59:31 GMT

System recommended content:

1. HPE ProLiant DL360 Gen10 Server – PSOD with smx-provider crash Admission failure in path: smx/sfcb-ProviderMa

2. ProLiant DL360 Server Maintenance and Service Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Tam92 — Tue, 22 Aug 2023 02:24:09 GMT

Hello,

Hard drive drivers are not available. If you're opting for the manual OS installation approach, you'll have to supply drivers tailored for the Storage controller while setting up the OS.

Retrieve the necessary storage controller driver (varying by controller model) from the HPE website.

Unpack the elements and input the .inf file when prompted to load the driver. This can be done via an external USB key.

Alternatively, you can utilize Intelligent Provisioning to smoothly install the Windows OS. Intelligent Provisioning comes equipped with essential drivers for OS installation, eliminating the need for the aforementioned process.

Thanks,

TAM

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Xena_Angel — Tue, 22 Aug 2023 19:16:56 GMT

OK, I am using Intellegnet Provisioning and I can see and load he storage controller driver from the hpdrvs\storage directory. So if that is not the problem. What else could be the problem that I keep getting the error "We couldn't create a new patition or locate the exististing one."? I appreciate your time.

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Tam92 — Wed, 23 Aug 2023 03:54:13 GMT

Can you try with a different Iso image ?

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Xena_Angel — Wed, 23 Aug 2023 12:51:10 GMT

Yes, I have tried 2 different CD/DVD ISO files, but it did not make a difference. Last night I tried using a bootable USB device and I am having the same issue.

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Xena_Angel — Wed, 23 Aug 2023 13:51:17 GMT

Now I have tried using diskpart to manually configure the disk and I am still getting the same error. Where do I find the setup log files when I am doing an assisted install? I am not finding them. I want to see the error message to see if it leads me down another path at this point.

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Xena_Angel — Wed, 23 Aug 2023 17:25:10 GMT

I cannot install when booting off the CD/DVD or USB drive because I get the message that is cannot create a new partition or locate an existing one. When I try to use intelligent provisioning everything works but when it goes to reboot the server it says that it cannot reboot the server. I can reset the server at that point and it will start running the intelligent provisioning script and then it stops. I can kick off the Windows install and again I get the same error about cannot create a new partition or locate an existing one. I am at a loss for what to do next. Any advice would be greatly appreciated.

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Tam92 — Thu, 24 Aug 2023 01:02:49 GMT

Hello,

I recommend deleting the array and then reconfiguring it before trying to proceed with the installation. If the problem continues, it's advisable to engage HPE support by creating a support case. This will allow for more comprehensive troubleshooting to be carried out

CONTACT HPE WORLDWIDE home page: https://www.hpe.com/us/en/contact-hpe.html ;
You can also log a new case, check the status / update details or raise a call back request on an existing case using the link provided : HPE Support Case Manager

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Xena_Angel — Thu, 24 Aug 2023 13:19:23 GMT

I appreciate your time. I have deleted and recreated the array many times. Last night I tried to install a newer version of Intelligent Provisioning, which appeared to go through the entire process and reboot, but now F10 does not work to get into Intelligent Provisioning. I downloaded an older version and I am trying to install that now. I did open an HPE case earlier this week and have not heard back. I will follow up on that today as well. Thank you.

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Tam92 — Fri, 25 Aug 2023 00:31:45 GMT

Hello,

Thanks for the update.. This needs deeper analysis.. HPE support should be able to resolve the issue for you.

I will close this thread now. Have a lovely day.

Thanks,
TAM

Re: Windows Server 2016 driver for HPE EG000300JWEBF to install OS on Proliant DL360 Gen10

Xena_Angel — Thu, 31 Aug 2023 15:42:25 GMT

It turns out that the server needs a new system board.