topic Re: Stuck on X:\windows\system32\cmd.exe - startnet.cmd in Operating System - Microsoft

Stuck on X:\windows\system32\cmd.exe - startnet.cmd

Owen_Banda — Thu, 21 Mar 2024 12:43:26 GMT

Am always Stuck on X:\windows\system32\cmd.exe - startnet.cmd, whenever I try to install the Windows Server 2016 operating system on HP Ploliant DL380 Gen 10. Need help on how to go about it. Thanks

Re: Stuck on X:\windows\system32\cmd.exe - startnet.cmd

shiva_jr — Sun, 17 Mar 2024 16:17:59 GMT

Hi @Owen_Banda ,

1) Test the DIMM (Memory) and Hard disk by running the diagnostic test.
2) If the DIMM and Disks passed the test, run the following commands in X:/windows prompt
bootsect/nt60 sys and bootrec /fixboot
3) If the DIMM and Disks are failed in test, then log the HPE Support ticket and get it replaced.
Regards,
Shiva_JR
Please mark as 'Accepted solution' and give me 'Kudos' if my post worked.

Re: Stuck on X:\windows\system32\cmd.exe - startnet.cmd

MV3 — Tue, 19 Mar 2024 23:54:08 GMT

Hello,

Could you kindly inform us of the method used for installing the operating system? Was it done through intelligent provisioning, or was it a manual process involving booting from the DVD or uploading the image to iLO?

Cheers....