https://community.hpe.com/t5/operating-system-microsoft/hp-d1187a-monitor/m-p/2584345#M1511 Hi there.<BR />Are you sure, taht you installed the correct drivers for your vga interface ?<BR />Check your hardware settings pls.<BR />Rgds<BR />Alexander M. Ermes Tue, 25 Sep 2001 10:57:00 GMT Alexander M. Ermes 2001-09-25T10:57:00Z https://community.hpe.com/t5/operating-system-microsoft/hp-d1187a-monitor/m-p/2584344#M1510 I have a D1187A monitor connected to an Elite2/True fx video accelorator with a 3Dlabs Glint 500 tx + Glint Delta chip. The monitor is capable of 1280x1024. I can only get a reasonable display when I set the parametes in NT 4 workstation to 1152X870, 32768 colours 75Hz. set on 1280X1024 I get a tripple display, set at 1152X870 the image does not fill the screen, how can I expand this, do I use the contols in the panel on the l/h side, if so how do I do it, ort can I get it to work correctly on 1280X1024 Tue, 25 Sep 2001 08:11:22 GMT https://community.hpe.com/t5/operating-system-microsoft/hp-d1187a-monitor/m-p/2584344#M1510 Ivan Stretten 2001-09-25T08:11:22Z https://community.hpe.com/t5/operating-system-microsoft/hp-d1187a-monitor/m-p/2584345#M1511 Hi there.<BR />Are you sure, taht you installed the correct drivers for your vga interface ?<BR />Check your hardware settings pls.<BR />Rgds<BR />Alexander M. Ermes Tue, 25 Sep 2001 10:57:00 GMT https://community.hpe.com/t5/operating-system-microsoft/hp-d1187a-monitor/m-p/2584345#M1511 Alexander M. Ermes 2001-09-25T10:57:00Z