topic Re: BIOS Problem? - QS/16S in Operating System - Microsoft

BIOS Problem? - QS/16S

Makoto Sugiyama — Tue, 07 Jan 2003 05:21:30 GMT

I am still using Vectra QS/16S. I am currenty having problem with Vectra QS/16S. When I boot up, I am getting these errors:
"Invalid configuration information - run SETUP program"

Then, I inserted setup program disk in Floopy Disk Drive.
But this error appeard.
"Diskette boot record error"

FD drive and cable is fine.
What can I do?
thanks in advance

Re: BIOS Problem? - QS/16S

Ron Kinner — Tue, 07 Jan 2003 16:10:35 GMT

ftp://ftp.hp.com/pub/servers/OBSOLETE/

might have the setup software so you can make a new disk if the site is still there.

Ron

Re: BIOS Problem? - QS/16S

Makoto Sugiyama — Wed, 08 Jan 2003 15:52:12 GMT

Hi, Ron.
Thank you for your advice.
Actually, I couldn't assign that ftp site.

I have a problem about boot up. When I boot Setup disk at another PC, it did work.

I totally have no idea about this problem.

Re: BIOS Problem? - QS/16S

Ron Kinner — Wed, 08 Jan 2003 17:50:01 GMT

If the floppy works in another machine I would use the other machine to make a new copy of the setup disk. See if that one will work. Sounds like your Floppy Drive is a bit dirty or a tad out of calibration so if a new floppy doesn't work I would try the floppy drive from the working one in the bad one.

If all else fails there used to be programs which could read and set the CMOS. You might find one on www.shareware.com or www.winsite.com. I'd use the program to copy the working machine's CMOS and put it on the bad one.

Ron

Re: BIOS Problem? - QS/16S

Kevin_227 — Thu, 08 Jan 2004 14:00:34 GMT

I ran into this yesrerday and resolved it today in a strange way. It was a DL580 G2, brand new, trying to get Smart Start CD to boot but got this message after initializing the Controller. Come to find they PCI-X 1 and 2 lights were amber on the top of the server where the diagnostics lights are. I moved the gigabit NIC to slot 3, the amber lights went away and I didn't get the error any more.