https://community.hpe.com/t5/operating-system-microsoft/mpeg-cant-convert-to-dat/m-p/3098745#M3322 Your file contains 2 channel sound instead of stereo, welcome to an old club! You do not say what the source of your MPEG file is or from where? Usually if you turn off conformance the file burns OK and plays on the DVD player<BR /><BR />Hope this helps..<BR /><BR />Ganesh Fri, 31 Oct 2003 16:43:34 GMT Ganesh Babu 2003-10-31T16:43:34Z https://community.hpe.com/t5/operating-system-microsoft/mpeg-cant-convert-to-dat/m-p/3098744#M3321 i have convert an image file to .mpeg using easyVCD and trying to convert it to .dat using nero burning rom but i always get this message.<BR /><BR />mpg was invalid, need mpeg-1 which was encoded for video-cd. <BR />audio:44.1khz stereo:224Kbit/s<BR />video:352x240/29.97Hz or 352x240/23.97Hz or 352x288/25Hz<BR /><BR />the following problems are found:<BR />-stream encoding which is invalid for a [Super] Video-CD<BR />-no video<BR />-no audio Tue, 21 Oct 2003 12:20:59 GMT https://community.hpe.com/t5/operating-system-microsoft/mpeg-cant-convert-to-dat/m-p/3098744#M3321 vit_4 2003-10-21T12:20:59Z https://community.hpe.com/t5/operating-system-microsoft/mpeg-cant-convert-to-dat/m-p/3098745#M3322 Your file contains 2 channel sound instead of stereo, welcome to an old club! You do not say what the source of your MPEG file is or from where? Usually if you turn off conformance the file burns OK and plays on the DVD player<BR /><BR />Hope this helps..<BR /><BR />Ganesh Fri, 31 Oct 2003 16:43:34 GMT https://community.hpe.com/t5/operating-system-microsoft/mpeg-cant-convert-to-dat/m-p/3098745#M3322 Ganesh Babu 2003-10-31T16:43:34Z