Failover NIC Cards for HP Netserver

Preston Rohrick — Wed, 09 Feb 2000 09:55:13 GMT

I have an HP Netserver and I would like to install a redundant network card
solution. Is there a product available for my HP Netserver to enable me to do
this?
If so, what is it and where do I find it?

Note:
My definition of Failover NIC:
If one NIC fails, the other takes over with identical configuration.

Re: Failover NIC Cards for HP Netserver

Jamie Hughes_1 — Wed, 09 Feb 2000 12:28:47 GMT

Hello Preston,

I think you want to look for NICs that support Adaptive Fault Tolerance or
Adapter Teaming. The HP 10/100 NIC (D5013A) with the latest drivers from the
HP website, should be able to do this. We also have a white paper called Fault
Tolerant Adapters that has some good info in it.

To get the latest driver for the D5013A, go here:

http://www.hp.com/cposupport/servers/software/txdrv.exe.html

To get the Technical Paper, go to this link and click on Fault Tolerant
Adapters.

http://netserver.hp.com/netserver/solutions/high_availability/ha_techpapers.asp

I hope that helps you out.

Regards,
Jamie Hughes

topic Re: Failover NIC Cards for HP Netserver in Operating System - Microsoft

Failover NIC Cards for HP Netserver

Re: Failover NIC Cards for HP Netserver