topic Re: Remote Printing from NT 4.0 in Operating System - Microsoft

Remote Printing from NT 4.0

Ted Sizemore_1 — Mon, 06 Mar 2000 13:32:58 GMT

My company has two VPNs setup. We are running Tcp/Ip

I can ping the remote printer but when I try and setup the queue on the server,
it says it cannot find the printer. Anyone have any suggestions??

Re: Remote Printing from NT 4.0

Gerard Laygui — Tue, 07 Mar 2000 14:06:53 GMT

Ted,

I need a bit more info on the situation. What steps are you doing to create
this printer queue? Is this a printer attached to a HP Jet direct card or is
this a printer that is shared on a remote PC? Are you using the MS TCP/IP
Printing or Jet Admin?

Regards,

Gerard Laygui
MCSE, CCNA

Re: Remote Printing from NT 4.0

Ted Sizemore_1 — Wed, 08 Mar 2000 12:17:16 GMT

Gerard,

The printer has a jet direct card. I have tried using jet admin to find the
remote printer, with no success. I can ping the remote printer with no problem,
but when I go and try and setup a queue using Nt4.0 w/ New Port ( Hp Jetdirect
Port), it cannot find the printer.
the printer is setup on a peer to peer network running tcp/ip. Any help will
be appreciated.

TED

Re: Remote Printing from NT 4.0

Gerard Laygui — Fri, 10 Mar 2000 10:00:09 GMT

Ted,

I'll assume that since you can ping the JetDirect card, you have pretty good
connectivity across your VPN. I'm going to guess that when your adding your HP
JetDirect port, it is not showing up in the Printer List. In order to get
around this, select the Manually specify printer and manually input the TCP/IP
address. This should work unless your VPN is configured a certain way.

Good Luck,

Gerard Laygui
MCSE, CCNA