Omnibook XE2-DC problems with IRport / Windows2000

Hector_22 — Tue, 17 Aug 2004 04:52:19 GMT

I have an Omnibook XE2-DC that originaly had windows 98 and then was migrated to windows 2000, the problem is that it is not possible to connect to throught the IRport while the system says that the device is working properly. Is this IR port working with windows 2000? Is it possible to get an updated driver?

Re: Omnibook XE2-DC problems with IRport / Windows2000

Roger Faucher — Tue, 17 Aug 2004 21:10:39 GMT

Hector:

Did you upgrade the BIOS before you installed WIN2K? See:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=19432&locale=en_US&taskId=135&prodTypeId=321957&prodSeriesId=31647&swEnvOID=181

On that same link, click on "HP Configuration Interface for Windows 2000" and read/follow the text. If you didn't install an ACPI BIOS before installing WIN2K, you may have to re-install.

HTH

Make a great day!

Roger

topic Omnibook XE2-DC problems with IRport / Windows2000 in Operating System - Microsoft

Omnibook XE2-DC problems with IRport / Windows2000

Re: Omnibook XE2-DC problems with IRport / Windows2000