https://community.hpe.com/t5/operating-system-microsoft/jetdirect-and-windows-nt-tcp-ip-network/m-p/2421400#M594 I work in the Network Control Center and have some users that cannot print to <BR />there HP4+ printer. It is connected to the network through the jetdirect card <BR />with BNC(coax). It uses a print server on a different subnet so users can <BR />connect to it. <BR /><BR />This is what happens when we try to print. When you try to print anything to <BR />it, it doesn't do anything. If you look in the print que you see the document <BR />still in there and the status says "Printing-status not available". Every 10 <BR />seconds or so it flashes and error there. Nothing prints out.<BR /><BR />I have tried bypassing the print server and printing directly to it. It showed <BR />it spooling, but nothing printed. It can print the test page built in to the <BR />printer. Only TCP/IP is enabled and using DHCP.<BR /><BR />We had a problem with the share before and rebuilt it with the latest drivers. <BR />I can telnet to it so I know the connection is fine. <BR /><BR />If anyone has any input, it would help greatly.<BR /><BR />Thanks,<BR />SrA Lars Floden<BR />USAF Wed, 12 Apr 2000 12:06:43 GMT Lars Floden_1 2000-04-12T12:06:43Z https://community.hpe.com/t5/operating-system-microsoft/jetdirect-and-windows-nt-tcp-ip-network/m-p/2421400#M594 I work in the Network Control Center and have some users that cannot print to <BR />there HP4+ printer. It is connected to the network through the jetdirect card <BR />with BNC(coax). It uses a print server on a different subnet so users can <BR />connect to it. <BR /><BR />This is what happens when we try to print. When you try to print anything to <BR />it, it doesn't do anything. If you look in the print que you see the document <BR />still in there and the status says "Printing-status not available". Every 10 <BR />seconds or so it flashes and error there. Nothing prints out.<BR /><BR />I have tried bypassing the print server and printing directly to it. It showed <BR />it spooling, but nothing printed. It can print the test page built in to the <BR />printer. Only TCP/IP is enabled and using DHCP.<BR /><BR />We had a problem with the share before and rebuilt it with the latest drivers. <BR />I can telnet to it so I know the connection is fine. <BR /><BR />If anyone has any input, it would help greatly.<BR /><BR />Thanks,<BR />SrA Lars Floden<BR />USAF Wed, 12 Apr 2000 12:06:43 GMT https://community.hpe.com/t5/operating-system-microsoft/jetdirect-and-windows-nt-tcp-ip-network/m-p/2421400#M594 Lars Floden_1 2000-04-12T12:06:43Z https://community.hpe.com/t5/operating-system-microsoft/jetdirect-and-windows-nt-tcp-ip-network/m-p/2421401#M595 I had to install JetAdmin on each PC on my NT network to get them to print. I gave the printer an IP address too. Hope this helps. Sun, 14 May 2000 01:55:42 GMT https://community.hpe.com/t5/operating-system-microsoft/jetdirect-and-windows-nt-tcp-ip-network/m-p/2421401#M595 Deb Lueth 2000-05-14T01:55:42Z