topic Re: DL360 G4 and NT4.0 in Operating System - Microsoft

DL360 G4 and NT4.0

Jason Dupuis_2 — Fri, 10 Jun 2005 12:26:35 GMT

Hi all,

I have a site that is still using NT4.0, they need to set up a BDC on a DL360 G4 and since the version of Smartstart does not have NT4.0 as an option will earlier version like Smartstart 6.3 work or does someone have better suggestion.

Thanks in advance!

Re: DL360 G4 and NT4.0

Oguz Kutlu Asik — Sun, 12 Jun 2005 09:47:17 GMT

Hi,

I don't think smartstart is must. I think you need to find and copy array and disk drivers to a floppy, and press f6 to load custom drivers from floppy.

If server's role is only bdc, why to install on a DL360? I suggest using a virtual machine on another server.

Re: DL360 G4 and NT4.0

Vincent Nijman — Thu, 16 Jun 2005 05:12:26 GMT

To just give a technical respons.
I don't think that NT4 is supported on a G4 anymore (driver wise). So an earlier version of SmartStart is not the solution.

Another option could be to just install W2K as a BDC?