topic Re: LongHorn Installation Problem in Operating System - Microsoft

LongHorn Installation Problem

Ramprasad KM — Fri, 05 May 2006 03:25:45 GMT

We are trying to install Windows LongHorn 64-bit Beta-1 on a machine:

Machine Details:

HP Proliant DL-360 G4 Server.
Intel Xeon Processor 3.4 GHz.
RAM : 4 GB.

Type of Install:

Brand New Machine, Boot from DVD, Install.

I am getting the following error message:

*** Start Of Error Message ***

A problem has been detected and windows has been shutdown to prevent damage to your computer.

If this is the first time you have seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for Viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption and then restart your computer.

Technical Information:

STOP : 0x0000007B (0xFFFFF98000720ED0,0XFFFFFFFFC0000034,0X0000000000000000,0X0000000000000000)

*** End Of Error Message ***

The above error message appears with a blue screen in the middle of the installation of LongHorn.

Any help to solve this is appreciated !!

Thank you very much, in advance.

Re: LongHorn Installation Problem

Roger Faucher — Fri, 05 May 2006 07:28:28 GMT

Hi:

It sounds like you need to copy the SCSI HA 64-bit drivers to floppy or CD and let the install process use them. I don't know if Longhorn uses the same technique as W2K3 and W2K (pressing F6 when the message appears at the bottom of the screen).

Hope this helps.

Make a great day!

Roger

Re: LongHorn Installation Problem

Alan_152 — Mon, 08 May 2006 14:44:19 GMT

Have you reported this as a bug yet?

Alternatively, you might want to fdisk the drives, or get some sort of "low level format" application to give the drives a good wiping.

Re: LongHorn Installation Problem

Marc Carney — Fri, 19 May 2006 11:08:46 GMT

Have you installed it from Smartstart or have you bypassed the Smartstart part of the installation ? Is it an original MS CD/DVD ? If it is a copy, then can you try the media on another machine to confirm that it works.

Re: LongHorn Installation Problem

Melinda Cooper — Wed, 24 May 2006 16:54:28 GMT

Not an answer to this question, however, is there a newer version of smartstart for installing Longhorn? We've currently got V7.4