https://community.hpe.com/t5/operating-system-microsoft/snmp-traps-from-emc-celerra/m-p/4261427#M8971 Hello,<BR />I'm having some problems configuring traps from a Celerra SAN in HPSIM. I've imported several .mib's into HPSIM but when sending a test trap from the celerra it shows up as "Generic Unregistered". When I look at the mibs in "SNMP Trap Settings" some of them is empty while others contain information about the traps.<BR /><BR />I've also imported the same .mib's in oidview with a much better result. There it shows severity and where the trap comes from.<BR /><BR />I'd appreciate if anyone with insight in this matter could help.<BR /><BR />The .mib's I've imported are the following: emc-mib.mib, emccelerra-mib.mib, fcmgmt-mib.mib, emcgateway-mib.mib.<BR /><BR />Brgds<BR />/Simon Tue, 02 Sep 2008 06:55:34 GMT SiE 2008-09-02T06:55:34Z https://community.hpe.com/t5/operating-system-microsoft/snmp-traps-from-emc-celerra/m-p/4261427#M8971 Hello,<BR />I'm having some problems configuring traps from a Celerra SAN in HPSIM. I've imported several .mib's into HPSIM but when sending a test trap from the celerra it shows up as "Generic Unregistered". When I look at the mibs in "SNMP Trap Settings" some of them is empty while others contain information about the traps.<BR /><BR />I've also imported the same .mib's in oidview with a much better result. There it shows severity and where the trap comes from.<BR /><BR />I'd appreciate if anyone with insight in this matter could help.<BR /><BR />The .mib's I've imported are the following: emc-mib.mib, emccelerra-mib.mib, fcmgmt-mib.mib, emcgateway-mib.mib.<BR /><BR />Brgds<BR />/Simon Tue, 02 Sep 2008 06:55:34 GMT https://community.hpe.com/t5/operating-system-microsoft/snmp-traps-from-emc-celerra/m-p/4261427#M8971 SiE 2008-09-02T06:55:34Z