topic Re: "Machine is not in committed state " in Operating System - Microsoft

"Machine is not in committed state "

Atekeli — Wed, 24 Jun 2009 10:01:24 GMT

After 6930p mainboard change , Notebook gives a warning message at the beginning that "Machine is not in committed state "and in bios setting the AMT Options is greyed so we cant make any changes, how can I solve this problem

Re: "Machine is not in committed state "

Karl Skelton — Wed, 24 Jun 2009 14:01:18 GMT

Is this a CAS issue?

Re: "Machine is not in committed state "

Atekeli — Wed, 24 Jun 2009 14:04:00 GMT

CAS issue means?

Re: "Machine is not in committed state "

Karl Skelton — Thu, 04 Feb 2021 21:36:30 GMT

you posted your question to the Client Automation Standard (CAS) forum!

Is the issue you see related to CAS software? If not, you have the wrong forum. https://community.hpe.com/t5/operating-system-microsoft/machine-is-not-in-committed-state/m-p/4621592/highlight/true#.X379yEczY2w

Re: "Machine is not in committed state "

Atekeli — Wed, 24 Jun 2009 14:14:23 GMT

My problem is to obtain "AMT Enabling tool" ,in forums I read that after using this software the warning message will be lost , Although one of the forum user gives a link for this patch , forum admin erase the link
thanks

Re: "Machine is not in committed state "

Karl Skelton — Thu, 17 Nov 2022 10:52:08 GMT

OK. still not sure if this is a CAS issue. Did you also try the HW forums?

But... what about...
~~http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688870&prodTypeId=321957&prodSeriesId=3688868&swLang=13&taskId=135&swEnvOID=1093~~
[Moderator edit: The above link is no longer valid. Please refer to https://support.hpe.com]
Under FIRMWARE...

Re: "Machine is not in committed state "

Atekeli — Wed, 24 Jun 2009 14:44:57 GMT

thanks for your interest

I use the patch but there is error message as shown below;
error (8193) Intel ME Interface :Cannot locate ME Device driver

Re: "Machine is not in committed state "

Atekeli — Thu, 25 Jun 2009 10:20:56 GMT

do you know another tool for this subject in the forum I read in another forum that there is USB tool exist and some of the problem owner solved this problem

Re: "Machine is not in committed state "

Dennis Handly — Thu, 17 Nov 2022 10:55:07 GMT

Another thread with the same problem:
~~http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1353092~~

[Moderator edit: Removed the broken links]

Re: "Machine is not in committed state "

Kasun — Wed, 03 Mar 2010 04:01:34 GMT

After replace the motherboard you will appears this error message Machine is not in committed state "
you can remove this error msg following steps

1) Download this file using this link
http://rapidshare.com/files/358146671/AMT_brand_tool.rar.html

2) then create a bootable usb pen drive or
floppy disk and run when your booting
your note book

3) now its very easy to remove in the dos
mode,

4) in the dos mode press dir then you will
be able to see more types of tools and
exes.
5) now you can see AMT BRAND TOOL, Run this
tool ..

6) after you run this it will
automatically restart.. then you want be
able to see that error msg
thnak you..

Re: "Machine is not in committed state "

R.C. — Wed, 21 Apr 2010 09:14:17 GMT

Where can I go to get this tool? I tried the link provided, but it is no longer valid.

Re: "Machine is not in committed state "

Kasun — Tue, 11 May 2010 03:55:48 GMT

hi that link has been expired this is the new link

http://www.directsoftwaredownload.com/AMTBRANDTOOL.html

thanak you

Re: "Machine is not in committed state "

Matthias Schelle — Fri, 06 May 2011 08:00:51 GMT

Dear all,
is it possible to post the AMTTool again?

We have the same problem with an 8440p model after changing the motherboard.

Thank you very much in advance,
Mathew

Re: "Machine is not in committed state "

boxman — Fri, 01 Jun 2012 16:42:35 GMT

I, too, would like a link to a working tool. I've got one "machine not in a commited state."

I did manage to find a copy of CpqAmt Utility Version 1.0, but when I boot the program into DOS I get the command prompt message: "You must reboot the system with 'cpqamt reboot' after locking VPro configuration with one of : CPQAMT write [on, off,lock,reset]

I'm comfortable writing, say, an autoexec.bat file to manage the program, but I don't know what "locking VPro configuration" means, or how to do it. There are a bunch of .bat routines in the program, but I can't get any of them to help me unlock/edit/write a Vpro configuration.

Here is the state of this machine:

VPro uncommited

Descriptor locked

Management Engine enabled

Flash Protection Override disabled

Re: "Machine is not in committed state "

Perry Roberts — Fri, 03 Oct 2014 19:02:40 GMT

Where is the Vpro "not in committed state" utility/tool? wndmifit tool does not resolve this? cpqamt is not for Vpro units?