topic Adding dual processors in Operating System - Microsoft

Adding dual processors

Tyrome Brown — Tue, 23 Nov 1999 15:09:26 GMT

I have Terminal Server installed on a HP Vectra XU 6/200 server. I have
installed another processor. The bios sees the the processor, however, Terminal
Server does not. Is there a utility that will allow Terminal Server to
recognize the additional processor or will I have to re-install it?

Re: Adding dual processors

Paul Heffels_1 — Wed, 24 Nov 1999 15:13:26 GMT

Hi tyrome,

After installing another processor you need to register it with the OS. There
is a tool in the resource kit that does the job (although I have heard of
problems with it), and if you don't have the resource kit, you will need to
reinstall the OS.

Re: Adding dual processors

Jamie Hughes_1 — Fri, 03 Dec 1999 08:33:52 GMT

UPTOMP is the Resource Kit utility that should be used when adding a second
processor. Make sure you follow the instructions step-by-step.

Re: Adding dual processors

Vincenzo Bochicchio_1 — Tue, 07 Dec 1999 12:31:07 GMT

Tyrome-

You don't 'need' the uptomp.exe utility in the resource kit. You can actually
just follow the steps by Microsoft listed @ their website.

http://support.microsoft.com/support/kb/articles/Q156/3/58.asp

Make sure you backup your rdisk first! :)

Vincenzo