https://community.hpe.com/t5/storevirtual-storage/storevirtual-12-7-bond-type/m-p/7003532#M11513 <P>Schedule a downtime first, break the bond so that 1 NIC can be configured as Lefthand OS and later you may reconfigure desired bondling but make sure to keep suffient downtime for applications as it causes outage</P> Tue, 24 Apr 2018 13:57:33 GMT Ravi_K 2018-04-24T13:57:33Z https://community.hpe.com/t5/storevirtual-storage/storevirtual-12-7-bond-type/m-p/6988140#M11280 <P>I have a management group of StoreVirtual 4530 clusters running SAN iQ 12.7. I originally set up the interfaces to bond two 10G ports as active-passive. I would like to change the bond type to alb on each system. Traditionally, I could remove the bond, and the network config would transfer to one of the members of the bond. This has change, and the bond cannot be removed, because it, and I quote, "is set as the Lefthand OS Interface and will not have any active interfaces after deletion." Is there a way to circumvent this block?</P> Fri, 10 Nov 2017 21:25:49 GMT https://community.hpe.com/t5/storevirtual-storage/storevirtual-12-7-bond-type/m-p/6988140#M11280 GregoryS 2017-11-10T21:25:49Z https://community.hpe.com/t5/storevirtual-storage/storevirtual-12-7-bond-type/m-p/7003532#M11513 <P>Schedule a downtime first, break the bond so that 1 NIC can be configured as Lefthand OS and later you may reconfigure desired bondling but make sure to keep suffient downtime for applications as it causes outage</P> Tue, 24 Apr 2018 13:57:33 GMT https://community.hpe.com/t5/storevirtual-storage/storevirtual-12-7-bond-type/m-p/7003532#M11513 Ravi_K 2018-04-24T13:57:33Z