topic Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster in StoreVirtual Storage

eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

FergTF — Tue, 06 Aug 2024 14:15:12 GMT

Hello

We have a failed storage system on our P4300G2 cluster. I have removed it from the cluster. it still shos up on the CMC but if i cannot see any way to completely remove it to be re-imaged and re-added. There is no repair system option, if i re-add it to the cluster it remains in a broken state. Can someone please point me to relevant documentation for the process of completely removing it, rebuilding and re-adding to the cluster.

many thanks

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

Assen — Tue, 06 Aug 2024 11:12:45 GMT

@FergTF Hi,

could you please post some screenshots from the CMC with the status of the system/s, cluster, the managment group, the volumes and provide some more info and context to the failure and error messages you saw or see? Maybe this will help to point you in the right direction.

This is the right way you repair a brocken storevirtual system: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-kc0112618en_us

The repair storage system, gives you the opportunity to bring back the system where it was, after successfull repair and you have only one restripe, as far as I remember.

Best

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

FergTF — Tue, 06 Aug 2024 11:48:54 GMT

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

FergTF — Tue, 06 Aug 2024 11:52:31 GMT

thanks for getthing back to me so swiftly.

We lost the unit after a power outage. the console messages says "cannot log in to the console because the storage system has not yet fully initialized. Wait a minute and try again."

My attempts to remove it and re-add via the CMC have come to nothing, i cannot see a way to make any difference. I keep removing it and re-adding but it remainsd in the same state.

the menus available for both storgae system tasks and right click on the storage system are: add to new cluster, add to existing cluster, edit hostname, power off or reboot, help.

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

FergTF — Tue, 06 Aug 2024 12:00:07 GMT

when i try to carry out the suggested actions i get this problem, attached.

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

Assen — Tue, 06 Aug 2024 12:23:55 GMT

I suspect the clientmqueue is full and that's the reason why the system can not initialize, but for this there is no easy fix for doing it yourself. You will need to get to the backend of the lefthand and this would need a support case, or you could reinstall the storage from scratch and add it again to the cluster.

Hope this helps at least a bit.

Cheers

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

FergTF — Tue, 06 Aug 2024 12:46:42 GMT

Is this not a support case? If not how do i raise one?

Also please can you direct me to documentation for reinstalling the storage from scratch and adding it again to the cluster.

Many thanks

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

Assen — Tue, 06 Aug 2024 14:16:38 GMT

Hi @FergTF ,

I understand that you’re looking for help with an issue you’re facing. The community website is designed for users to share knowledge, experiences, and tips related to HPE Product and Services. It's a place for general discussions and peer-to-peer support, not for official troubleshooting or customer support.

For specific issues or troubleshooting, our official support channels are better equipped to assist you. Our support team has access to detailed resources and tools that can help resolve your issue more effectively and efficiently. You can reach our support team by phone, live chat, support ticket system. They will be able to provide you with the dedicated assistance you need.

The documents for the recovery/reinstall can be found here: https://myenterpriselicense.hpe.com/cwp-ui/product-download-info/StoreVirtualSW_12.7/12.7/sw_free

On the site you will find the needed ISO and Guide.

HPE_StoreVirtual_Quick_Restore_DVD_AX694-11019.iso
HPE_P4X00_G2_and_HP_StoreVirtual_4x30_Storage_Sys_Recovery_Procedures_AX696-10089.pdf

Feel free to continue participating in our community discussions for general advice and to share your own experiences. It’s a great way to learn from and help other users. Check out also older posts for solutions and info.

Thank you for being a part of our community, and I hope you get the support you need quickly.

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

FergTF — Wed, 07 Aug 2024 08:59:34 GMT

OK great, thank you, much appreciated

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

FergTF — Thu, 08 Aug 2024 11:23:21 GMT

hello

I tried following the process to re-image but I get the foloowing error when trying to install the OS. Grateful for any insight you can offer.

(after pressing y to confirm erase exisitng data)

VIRTUAL=255

This is not a virtual platform

hwid = 255

DEBUG: Invalid hadrware unit - unit number is [255]

OS partition determined: [/dev/cciss/c0d0p2]

mount: mount point /mnt/xpart5 does not exist

Failed to create blatz file under brand directory, cannot mount new OS partition

Thanks

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

Assen — Thu, 08 Aug 2024 11:46:06 GMT

@FergTF Can you please retry with this 12.5 media, I found an old post from 2017 where the newer version was an issue.

https://myenterpriselicense.hpe.com/cwp-ui/product-download-info/StoreVirtualSW_12.5/12.5/sw_free?&

Here is the direct curl download too:

These urls are timebound and expire after 24 hrs, you can visit the portal again to get new urls after the expiration.

curl -o HPE_StoreVirtual_Quick_Restore_DVD_AX694-11017.iso "https://h30279.www3.hpe.com/prdownloads/HPE_StoreVirtual_Quick_Restore_DVD_AX694-11017.iso?downloadid=i_cW2SL4x2hwZdDF29keJR_TKfV3lw3sJvphDwtn-2NSMrXaqLqKzXx1xhH1UMlU26j01jL0o7FqUdgPpEOwFNvbZNNUuhtI7fpgWJlO43EncmXAvBkmXsdu6b2RFCqMTX9Wg4MsFB5_JBMDQR7z7w==&merchantId=SW_FREE&rnid=1.0&bpid=SWD&egid=F&__dlk__=1723203072_50cb081c9070b78dca5333776af1b5ed"

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

FergTF — Mon, 12 Aug 2024 06:51:57 GMT

@Assen Hello

i used the 12.5 media and succefully re-installed the OS.

It still did not respond well to trying to re-add it to the cluster, i went through various iterations but it never appeared as a cluster member. In the end i tried removing it from the management group using the config menu on the device. This appears to have been an error and the CMC now lists it's MAC with an RIP at the beginning, pic attached.

As ever I'd be grateful for assistance.

Best

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

FergTF — Thu, 15 Aug 2024 09:58:27 GMT

Hello

I have got it working again by re-imaging again, then i re-added to mgmt group and cluster, all seems OK now.

Thank you for your help.

Best

Fergus

Re: eject a failed storage system from a cluster, re-image and re-add on P4300G2 cluster

Sunitha_Mod — Mon, 19 Aug 2024 10:29:44 GMT

Hello @FergTF,

That's Awesome!

We are happy to hear you were able to find the solution and we appreciate you for keeping us updated.