https://community.hpe.com/t5/storevirtual-storage/nsm-150-drive-problem/m-p/4716568#M1857 I just picked up two older NSM150's on one of them the all the drives are working great set in raid 5. On the other unit all of the drives show yellow ! marks on them. I assume that I need to configure the drives before I can put them in a raid set. How do I go about doing so? All of the disks are showing up as Foreign Drivs. Has anyone had this problem? Tue, 23 Nov 2010 05:59:29 GMT Cody Carter 2010-11-23T05:59:29Z https://community.hpe.com/t5/storevirtual-storage/nsm-150-drive-problem/m-p/4716568#M1857 I just picked up two older NSM150's on one of them the all the drives are working great set in raid 5. On the other unit all of the drives show yellow ! marks on them. I assume that I need to configure the drives before I can put them in a raid set. How do I go about doing so? All of the disks are showing up as Foreign Drivs. Has anyone had this problem? Tue, 23 Nov 2010 05:59:29 GMT https://community.hpe.com/t5/storevirtual-storage/nsm-150-drive-problem/m-p/4716568#M1857 Cody Carter 2010-11-23T05:59:29Z https://community.hpe.com/t5/storevirtual-storage/nsm-150-drive-problem/m-p/5312571#M3610 <P>This is old, but any answer?&nbsp; How do you get the drive signature on a disk?</P> Thu, 25 Aug 2011 17:36:48 GMT https://community.hpe.com/t5/storevirtual-storage/nsm-150-drive-problem/m-p/5312571#M3610 Red01Z06 2011-08-25T17:36:48Z