https://community.hpe.com/t5/storevirtual-storage/remote-copy-no-primary-global/m-p/4749608#M2349 I re-sync the clocks on both sides and I checked the 'include primary volumes' and I think that fixed the issue. Mon, 07 Feb 2011 23:12:58 GMT Greg_IT 2011-02-07T23:12:58Z https://community.hpe.com/t5/storevirtual-storage/remote-copy-no-primary-global/m-p/4749607#M2348 I attempted to perform a remote copy to a site B and the copy does not work. I see in the state that the status is 'no primary global'. The error says 'The remote copy to 'sitea' is cluster 'cluster1' is blocked because the communication with the primary management group cannot be establised. <BR /><BR />I am able to ping from the CMC from both sites. I have site A on one VLAN 192.168.20.55 with a gateway of 192.168.20.1. I have site B on one VLAN on 192.168.20.129 with a gateway of 192.168.20.128. So, I have the IP range split from .128 below with just different gateways.<BR /><BR />Is this a network issue or a configuration issue? Mon, 07 Feb 2011 23:00:09 GMT https://community.hpe.com/t5/storevirtual-storage/remote-copy-no-primary-global/m-p/4749607#M2348 Greg_IT 2011-02-07T23:00:09Z https://community.hpe.com/t5/storevirtual-storage/remote-copy-no-primary-global/m-p/4749608#M2349 I re-sync the clocks on both sides and I checked the 'include primary volumes' and I think that fixed the issue. Mon, 07 Feb 2011 23:12:58 GMT https://community.hpe.com/t5/storevirtual-storage/remote-copy-no-primary-global/m-p/4749608#M2349 Greg_IT 2011-02-07T23:12:58Z https://community.hpe.com/t5/storevirtual-storage/remote-copy-no-primary-global/m-p/5370327#M3941 <P>It's works for me, thanks.</P> Mon, 24 Oct 2011 13:07:11 GMT https://community.hpe.com/t5/storevirtual-storage/remote-copy-no-primary-global/m-p/5370327#M3941 Omer Ugur CANKUT 2011-10-24T13:07:11Z