https://community.hpe.com/t5/storevirtual-storage/vsa-will-not-boot/m-p/4758278#M2428 It'll depend on the CPU. Do you know what it has? For running 64 bit VMs, the CPU will need to support Intel VT. Sat, 26 Feb 2011 01:22:02 GMT teledata 2011-02-26T01:22:02Z https://community.hpe.com/t5/storevirtual-storage/vsa-will-not-boot/m-p/4758276#M2426 <BR />I downloaded the latest VSA to install on my DL380 G4, with ESX 4.0.<BR />I deploy the OVF file onto the ESX 4.0 server. I have verified my SCSI id and other settings.<BR /><BR />When I power on the VSA I get the following message:<BR />“This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot please use a kernel appropriate for your CPU”<BR /><BR />Thanks,<BR /> Fri, 25 Feb 2011 14:06:20 GMT https://community.hpe.com/t5/storevirtual-storage/vsa-will-not-boot/m-p/4758276#M2426 Gene Kenny 2011-02-25T14:06:20Z https://community.hpe.com/t5/storevirtual-storage/vsa-will-not-boot/m-p/4758277#M2427 You may have to enable the CPU virtualization settings in your server's BIOS. Fri, 25 Feb 2011 14:45:26 GMT https://community.hpe.com/t5/storevirtual-storage/vsa-will-not-boot/m-p/4758277#M2427 adolbec 2011-02-25T14:45:26Z https://community.hpe.com/t5/storevirtual-storage/vsa-will-not-boot/m-p/4758278#M2428 It'll depend on the CPU. Do you know what it has? For running 64 bit VMs, the CPU will need to support Intel VT. Sat, 26 Feb 2011 01:22:02 GMT https://community.hpe.com/t5/storevirtual-storage/vsa-will-not-boot/m-p/4758278#M2428 teledata 2011-02-26T01:22:02Z