https://community.hpe.com/t5/storevirtual-storage/nsm150-error-booting-up/m-p/4471518#M297 Hello All,<BR />I have a NSM 150 I use to host my test VM's. I had a power failure and this unit took a hard shutdown even connected to a UPS. Upon boot-up I am getting an error from the SANIQ software<BR /><BR />Here is the error on boot-up:<BR /><BR />Uncompressing Linux ok…ok booting the kernel<BR /><BR />Loading keymap: us [ok]<BR /><BR />Type start (When I type start I receive the following:)<BR /><BR />Reset: error while loading shared library libraries libgpm.s0.1 cannot open shared object file: No such file or directory<BR /><BR />etc\lefthand\system\console: error while loading shared libraries: libstdc ++.so.3: cannot open shared object file: no such file or directory <BR /><BR />Type start (when I type start it just gives me the same error)<BR /><BR />I removed the module from IDE2 and it allows me to press start then it asks for the Configuration Login cred's<BR /><BR />Any help on how to correct this would be gratefully appreciated<BR /><BR />Thank You<BR />-Rene Alamo Mon, 03 Aug 2009 02:04:04 GMT Rene Alamo 2009-08-03T02:04:04Z https://community.hpe.com/t5/storevirtual-storage/nsm150-error-booting-up/m-p/4471518#M297 Hello All,<BR />I have a NSM 150 I use to host my test VM's. I had a power failure and this unit took a hard shutdown even connected to a UPS. Upon boot-up I am getting an error from the SANIQ software<BR /><BR />Here is the error on boot-up:<BR /><BR />Uncompressing Linux ok…ok booting the kernel<BR /><BR />Loading keymap: us [ok]<BR /><BR />Type start (When I type start I receive the following:)<BR /><BR />Reset: error while loading shared library libraries libgpm.s0.1 cannot open shared object file: No such file or directory<BR /><BR />etc\lefthand\system\console: error while loading shared libraries: libstdc ++.so.3: cannot open shared object file: no such file or directory <BR /><BR />Type start (when I type start it just gives me the same error)<BR /><BR />I removed the module from IDE2 and it allows me to press start then it asks for the Configuration Login cred's<BR /><BR />Any help on how to correct this would be gratefully appreciated<BR /><BR />Thank You<BR />-Rene Alamo Mon, 03 Aug 2009 02:04:04 GMT https://community.hpe.com/t5/storevirtual-storage/nsm150-error-booting-up/m-p/4471518#M297 Rene Alamo 2009-08-03T02:04:04Z