https://community.hpe.com/t5/storevirtual-storage/remotecopy-and-backup-with-windows/m-p/5282930#M3477 it's to easy.<BR />for backup in the remote location you must mark the option "include primary volume".<BR />than you can mount the valid snapshot at the remote site for backup Wed, 01 Jun 2011 11:53:01 GMT andre_muc 2011-06-01T11:53:01Z https://community.hpe.com/t5/storevirtual-storage/remotecopy-and-backup-with-windows/m-p/5282929#M3476 i will setup backup in my remote copy location <BR /><BR />I have 2 different management groups with 2 different Clusters.<BR /><BR />i setup a normal volume at the primary site and configure "new schedule to Remote Snapshot a Volume .." <BR />the system creates at the backup site a RemoteCopy Volume and copy all snapshots into this volume. fine.<BR /><BR />My Problem:<BR />now i will backup the data on the backup site, but i can not mount this data with the iscsi initiator. <BR /><BR />I found in the document Remote Copy User Guide the point "Using Remote Copy for off-site backup and recovery" but i found not my configuration problem.<BR /><BR />Thanks in advance!<BR /><BR />Andre Tue, 24 May 2011 13:58:36 GMT https://community.hpe.com/t5/storevirtual-storage/remotecopy-and-backup-with-windows/m-p/5282929#M3476 andre_muc 2011-05-24T13:58:36Z https://community.hpe.com/t5/storevirtual-storage/remotecopy-and-backup-with-windows/m-p/5282930#M3477 it's to easy.<BR />for backup in the remote location you must mark the option "include primary volume".<BR />than you can mount the valid snapshot at the remote site for backup Wed, 01 Jun 2011 11:53:01 GMT https://community.hpe.com/t5/storevirtual-storage/remotecopy-and-backup-with-windows/m-p/5282930#M3477 andre_muc 2011-06-01T11:53:01Z