https://community.hpe.com/t5/storevirtual-storage/convert-from-network-raid-10-to-network-raid-5/m-p/5338173#M3753 <P>We currently have 2-P4300 nodes setup in a Network Raid 10 array. We have purchased an additional P4300 and would like to convert from a Network Raid 10 to a Network Raid 5. How and can this been done without backing up, deleting, and restoring volumes?</P><P>&nbsp;</P><P>Thanks for any advise,</P><P>&nbsp;</P><P>Aaron</P> Tue, 20 Sep 2011 19:03:47 GMT aaron martin 2011-09-20T19:03:47Z https://community.hpe.com/t5/storevirtual-storage/convert-from-network-raid-10-to-network-raid-5/m-p/5338173#M3753 <P>We currently have 2-P4300 nodes setup in a Network Raid 10 array. We have purchased an additional P4300 and would like to convert from a Network Raid 10 to a Network Raid 5. How and can this been done without backing up, deleting, and restoring volumes?</P><P>&nbsp;</P><P>Thanks for any advise,</P><P>&nbsp;</P><P>Aaron</P> Tue, 20 Sep 2011 19:03:47 GMT https://community.hpe.com/t5/storevirtual-storage/convert-from-network-raid-10-to-network-raid-5/m-p/5338173#M3753 aaron martin 2011-09-20T19:03:47Z https://community.hpe.com/t5/storevirtual-storage/convert-from-network-raid-10-to-network-raid-5/m-p/5338175#M3754 <P>Hi,</P><P>&nbsp;</P><P>You can do this online... Just go the properties of the volume and change the protection level...</P><P>&nbsp;</P><P>Off course I assume you added the 3rd node already in the management group and cluster and that all data volumes are restriped accross all 3 nodes... And so the overall health is OK...&nbsp;</P><P>&nbsp;</P><P>Be sure that the health of the volume is OK, so that it is not in a degraded state or so...</P><P>&nbsp;</P><P>&nbsp;</P><P>Kr,</P><P>Bart</P> Tue, 20 Sep 2011 19:09:55 GMT https://community.hpe.com/t5/storevirtual-storage/convert-from-network-raid-10-to-network-raid-5/m-p/5338175#M3754 Bart_Heungens 2011-09-20T19:09:55Z