https://community.hpe.com/t5/storevirtual-storage/removal-hp4300-g2-node/m-p/5338731#M3755 <P>Hi,</P><P>&nbsp;</P><P>I have a 16TB 4300 G2 SAN, I need to change the storage nodes in my cluster from raid 10 to 5.</P><P>&nbsp;</P><P>All my volumes are in Network-Raid 10.</P><P>&nbsp;</P><P>The question is, if i remove one node from the cluster, would i lose all the data on the cluster? Or will it carry on working with all the data on one remaining node?</P><P>&nbsp;</P><P>&nbsp;</P> Wed, 21 Sep 2011 08:13:24 GMT SSSthorpc 2011-09-21T08:13:24Z https://community.hpe.com/t5/storevirtual-storage/removal-hp4300-g2-node/m-p/5338731#M3755 <P>Hi,</P><P>&nbsp;</P><P>I have a 16TB 4300 G2 SAN, I need to change the storage nodes in my cluster from raid 10 to 5.</P><P>&nbsp;</P><P>All my volumes are in Network-Raid 10.</P><P>&nbsp;</P><P>The question is, if i remove one node from the cluster, would i lose all the data on the cluster? Or will it carry on working with all the data on one remaining node?</P><P>&nbsp;</P><P>&nbsp;</P> Wed, 21 Sep 2011 08:13:24 GMT https://community.hpe.com/t5/storevirtual-storage/removal-hp4300-g2-node/m-p/5338731#M3755 SSSthorpc 2011-09-21T08:13:24Z https://community.hpe.com/t5/storevirtual-storage/removal-hp4300-g2-node/m-p/5348951#M3791 <P>If you have a 2 node cluster, you can do this online by taking down one server at the time, rebuild the raid, wait for them to resync, and do the other server(remember to have a failover manager running besides 2 nodes)</P> Thu, 29 Sep 2011 18:24:49 GMT https://community.hpe.com/t5/storevirtual-storage/removal-hp4300-g2-node/m-p/5348951#M3791 larsjohansen5 2011-09-29T18:24:49Z