https://community.hpe.com/t5/storevirtual-storage/questioning-availability-reports/m-p/5361981#M3894 <P>Hi,</P><P>&nbsp;</P><P>At least you can see this inside the CMC... Click on&nbsp;a storage node and click the third tab "Availability"... In normal situations this screen should be empty...</P><P>If there are volumes mentioned, this means that these volumes will loose I/O access when that selected node will go down...</P><P>&nbsp;</P><P>&nbsp;</P><P>Kr,</P><P>Bart Heungens</P> Fri, 14 Oct 2011 06:29:02 GMT Bart_Heungens 2011-10-14T06:29:02Z https://community.hpe.com/t5/storevirtual-storage/questioning-availability-reports/m-p/5361663#M3893 <P>We have 5 P4000s separated onto two different floors of our office building that are part of the same cluster with an FOM in place. Is there a way to get a report of which volumes or snapshots would be unavailable should one of the floors/sites lose connectivity? We've done tests, but it would be nice just to get a report that we could run every so often.</P><P>&nbsp;</P><P>Thank you for any input -&nbsp;</P><P>&nbsp;</P><P>MF</P> Thu, 13 Oct 2011 21:33:44 GMT https://community.hpe.com/t5/storevirtual-storage/questioning-availability-reports/m-p/5361663#M3893 morganfastest 2011-10-13T21:33:44Z https://community.hpe.com/t5/storevirtual-storage/questioning-availability-reports/m-p/5361981#M3894 <P>Hi,</P><P>&nbsp;</P><P>At least you can see this inside the CMC... Click on&nbsp;a storage node and click the third tab "Availability"... In normal situations this screen should be empty...</P><P>If there are volumes mentioned, this means that these volumes will loose I/O access when that selected node will go down...</P><P>&nbsp;</P><P>&nbsp;</P><P>Kr,</P><P>Bart Heungens</P> Fri, 14 Oct 2011 06:29:02 GMT https://community.hpe.com/t5/storevirtual-storage/questioning-availability-reports/m-p/5361981#M3894 Bart_Heungens 2011-10-14T06:29:02Z