https://community.hpe.com/t5/storevirtual-storage/disk-issue/m-p/5392461#M4105 <P>We are setting up our new SAN box and this is the first for the company.</P><P>&nbsp;</P><P>I have setup my 2 boxes and my volumes on the SAN cluster.</P><P>&nbsp;</P><P>I then initialized the disks and formatted the drives on my server however when I rebooted the server and SAN cluster my drives now are all not initialized and need to be formatted causing me to loose the data on the drives?</P><P>&nbsp;</P><P>Is there a way of getting the drives to appear as they were on my Server or is this because the way I have rebooted both the SAN and server?</P> Wed, 16 Nov 2011 15:37:03 GMT HMUSER 2011-11-16T15:37:03Z https://community.hpe.com/t5/storevirtual-storage/disk-issue/m-p/5392461#M4105 <P>We are setting up our new SAN box and this is the first for the company.</P><P>&nbsp;</P><P>I have setup my 2 boxes and my volumes on the SAN cluster.</P><P>&nbsp;</P><P>I then initialized the disks and formatted the drives on my server however when I rebooted the server and SAN cluster my drives now are all not initialized and need to be formatted causing me to loose the data on the drives?</P><P>&nbsp;</P><P>Is there a way of getting the drives to appear as they were on my Server or is this because the way I have rebooted both the SAN and server?</P> Wed, 16 Nov 2011 15:37:03 GMT https://community.hpe.com/t5/storevirtual-storage/disk-issue/m-p/5392461#M4105 HMUSER 2011-11-16T15:37:03Z