https://community.hpe.com/t5/storevirtual-storage/obtaining-consumed-space-from-cli/m-p/5400907#M4168 <P>Anyone had luck using CLI commands to obtain the "Consumed Space" on a thin provisioned NetWork RAID-5 volume.</P><P>&nbsp;</P><P>The getClusterInfo and getVolumeInfo commands can provide the "Reported Size" as the parameter "size". With say a Network RAID-10 volume using two-way replication you could likely calculate this value using the formula Consumed Space = size * 2. This isn't so easy with a thin provisioned NR5 LUN.</P><P>&nbsp;</P><P>I can get the "Consumed Space" value through the CMC GUI but I'm trying to automate obtaining this info through a command line script.</P><P>&nbsp;</P><P>Any ideas?</P> Fri, 25 Nov 2011 20:56:32 GMT Gerald Orban 2011-11-25T20:56:32Z https://community.hpe.com/t5/storevirtual-storage/obtaining-consumed-space-from-cli/m-p/5400907#M4168 <P>Anyone had luck using CLI commands to obtain the "Consumed Space" on a thin provisioned NetWork RAID-5 volume.</P><P>&nbsp;</P><P>The getClusterInfo and getVolumeInfo commands can provide the "Reported Size" as the parameter "size". With say a Network RAID-10 volume using two-way replication you could likely calculate this value using the formula Consumed Space = size * 2. This isn't so easy with a thin provisioned NR5 LUN.</P><P>&nbsp;</P><P>I can get the "Consumed Space" value through the CMC GUI but I'm trying to automate obtaining this info through a command line script.</P><P>&nbsp;</P><P>Any ideas?</P> Fri, 25 Nov 2011 20:56:32 GMT https://community.hpe.com/t5/storevirtual-storage/obtaining-consumed-space-from-cli/m-p/5400907#M4168 Gerald Orban 2011-11-25T20:56:32Z