https://community.hpe.com/t5/storevirtual-storage/change-disk-size/m-p/5509875#M4508 Good morning. I want to know if is possible change all the disk in one node from 1 tb sas to 2 tb sas. After thank sync data and then change disk in the other node. I have a p4300 g2 16 tb San starter edition. If the license Is to be changed isn't problem. Thank you. Riccardo Fri, 27 Jan 2012 00:03:25 GMT Rickix84 2012-01-27T00:03:25Z https://community.hpe.com/t5/storevirtual-storage/change-disk-size/m-p/5509875#M4508 Good morning. I want to know if is possible change all the disk in one node from 1 tb sas to 2 tb sas. After thank sync data and then change disk in the other node. I have a p4300 g2 16 tb San starter edition. If the license Is to be changed isn't problem. Thank you. Riccardo Fri, 27 Jan 2012 00:03:25 GMT https://community.hpe.com/t5/storevirtual-storage/change-disk-size/m-p/5509875#M4508 Rickix84 2012-01-27T00:03:25Z https://community.hpe.com/t5/storevirtual-storage/change-disk-size/m-p/5513197#M4530 <P>The license is tied to the mac address, however, you are not licensed to change out the disks for bigger ones. If you did it, you would also need to run the recovery disk to put SANiQ back on after the disk change.</P> Mon, 30 Jan 2012 18:55:46 GMT https://community.hpe.com/t5/storevirtual-storage/change-disk-size/m-p/5513197#M4530 bryan_hadzik 2012-01-30T18:55:46Z