https://community.hpe.com/t5/storevirtual-storage/moving-sql-cluster/m-p/5578625#M4830 <P>Hi,<BR />I am currently running SQL2005 cluster on 1G P4500 G2 28.8 and will migrate to a new SAN 10G P4500 G2 28.8<BR />Database servers in the cluster will stay the same but I will add 10G adapters to them prior and preconfigure them with new iSCSI IP addresses. My iSCSI VLAN is not routable so there are no gateway in TCP/IP configuration, should be a problem. SQL Cluster/virtual name and IP will stay the same as well. Existing Cluster is A<BR />1G model has SANiQ 9.0<BR />New 10G most likely 9.5<BR /><BR />my plan is:<BR />1. add 10G model to my existing management group.<BR />2. Create a new cluster B<BR />3. Edit volumes in Cluster A one by one and change the cluster name to a B<BR />4. iSCSI sessions should still be UP and connected to new nodes in Cluster B accordingly to my small test.<BR />5. Login to SQL cluster, access iSCSI initiator and change the source IP of iSCSI adapter to 10G<BR />6. Change the target IP to Cluster B IP address.<BR /><BR />Can anyone tell me if this would work?<BR />Do i have to upgrade SANiQ to match the SAN 9.5?<BR />Any problems migrating from 1G to 10G?</P> Fri, 09 Mar 2012 15:35:51 GMT bublik 2012-03-09T15:35:51Z https://community.hpe.com/t5/storevirtual-storage/moving-sql-cluster/m-p/5578625#M4830 <P>Hi,<BR />I am currently running SQL2005 cluster on 1G P4500 G2 28.8 and will migrate to a new SAN 10G P4500 G2 28.8<BR />Database servers in the cluster will stay the same but I will add 10G adapters to them prior and preconfigure them with new iSCSI IP addresses. My iSCSI VLAN is not routable so there are no gateway in TCP/IP configuration, should be a problem. SQL Cluster/virtual name and IP will stay the same as well. Existing Cluster is A<BR />1G model has SANiQ 9.0<BR />New 10G most likely 9.5<BR /><BR />my plan is:<BR />1. add 10G model to my existing management group.<BR />2. Create a new cluster B<BR />3. Edit volumes in Cluster A one by one and change the cluster name to a B<BR />4. iSCSI sessions should still be UP and connected to new nodes in Cluster B accordingly to my small test.<BR />5. Login to SQL cluster, access iSCSI initiator and change the source IP of iSCSI adapter to 10G<BR />6. Change the target IP to Cluster B IP address.<BR /><BR />Can anyone tell me if this would work?<BR />Do i have to upgrade SANiQ to match the SAN 9.5?<BR />Any problems migrating from 1G to 10G?</P> Fri, 09 Mar 2012 15:35:51 GMT https://community.hpe.com/t5/storevirtual-storage/moving-sql-cluster/m-p/5578625#M4830 bublik 2012-03-09T15:35:51Z