topic Re: CLIQ getPerformanceStats ;XML attribute "encording" is always UTF-8, but contents is S in StoreVirtual Storage

CLIQ getPerformanceStats ;XML attribute "encording" is always UTF-8, but contents is Shift-JIS.

菅野健一 — Tue, 23 Jul 2013 02:25:27 GMT

Hello,all

I have get LEFTHANDs performance data by ;

>cliq getperformancestats login=192.168.0.10 keyfile=secret.key output=xml

All counter is collect, except one thing.

Althogh XML encoding is UTF-8, but contents is Shift-JIS.

Is my command option or parameter wrong?

XML is following;

----

<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<gauche version="1.0">

....

----

I cannot open this XML by IE wth error "Invalid Code"

Regards.

Re: CLIQ getPerformanceStats ;XML attribute "encording" is always UTF-8, but contents is S

Ravi_K — Wed, 24 Jul 2013 11:39:41 GMT

Can you try using Username and password . I have pasted the syntax and description below

This command returns performance monitoring statistics.

Availability

: Windows, SAN/iQ

Version

: 8.0

Request Syntax

cliq getPerformanceStats login= userName= passWord=

Required The IP address or DNS-resolvable names of one or more storage systems

userName

Required The authentication user name for the storage system

passWord

Required The password for the storage system

keyFile

Required The encrypted key file (this is specified instead of the username and password

parameters)

interval

Optional The interval in between counter sampling in milliseconds. Defaults to 6000.Note:

Because the internal sampling frequency is 6 seconds, it's not recommended to set this

value less than 6000

Example

cliq getPerformanceStats login=10.1.2.3 userName=admin

passWord=secret

cliq getPerformanceStats

Performance can also be captured from CMC , i have attahced a small performance guide for your understanding.

Regards

Ravi

Re: CLIQ getPerformanceStats ;XML attribute "encording" is always UTF-8, but contents is S

菅野健一 — Thu, 25 Jul 2013 06:30:43 GMT

Hi,Ravi_K

I can get performance counter value correctly, but only "encording" is wrong.

XML Contents are encorded by Shift-JIS , so XML attribute shuld be "encording=Shift-JIS", not "UTF-8".

Is there a option or parameter to force fix encording?

I tried "chcp 437" for english code page.

Then content response are changed to english.

But volume names contain "Shift-JIS" charactors, so it is insufficient.

Thank you.

Re: CLIQ getPerformanceStats ;XML attribute "encording" is always UTF-8, but contents is S

Ravi_K — Thu, 25 Jul 2013 08:55:49 GMT

Sorry, even I didn't find much information on it.

I have attached a cliq guide for your reference, not sure if you referred already

Regards

Ravi