topic P4300G2 conection errors in StoreVirtual Storage

P4300G2 conection errors

Frank Verstraten — Fri, 12 Mar 2010 18:53:50 GMT

Hello, I just installed an HP lefthand San. Everything seems to work but suddenly I get disconnect from my CMC to one of the 2 nodes.

The node hangs and the only way to get any response is to reboot the node.

Node is running saniq 8.1. The other node is running fine but is on a remote site to do the replication.

Hope someone can help

Re: P4300G2 conection errors

Steve McGee — Tue, 08 Jun 2010 16:11:10 GMT

Sounds like you are experiencing WAN connectivity issues. Have you initiated a continuing ping test from a computer at site 1 to the SAN at site 2? Look for increases in response times and timeouts. Either one of these is indicative of connectivity issues. Either the size of your pipe is saturated or somewhere along the way one of the hops is problematic.

Re: P4300G2 conection errors

Raul Robles_1 — Tue, 15 Jun 2010 22:59:41 GMT

Make sure, there are no jumpers on your motherboard.