https://community.hpe.com/t5/storevirtual-storage/lacp-load-balancing-mode/m-p/6285811#M7688 <P><A target="_blank" href="https://community.hpe.com/t5/HP-StoreVirtual-Storage-LeftHand/NIC-Bond-setup-which-option-is-best/td-p/5681235#.UpdC9PEa3IU">http://h30499.www3.hp.com/t5/HP-StoreVirtual-Storage-LeftHand/NIC-Bond-setup-which-option-is-best/td-p/5681235#.UpdC9PEa3IU</A></P> Thu, 28 Nov 2013 13:24:27 GMT TurbinYA 2013-11-28T13:24:27Z https://community.hpe.com/t5/storevirtual-storage/lacp-load-balancing-mode/m-p/6275797#M7551 <P>I am planning to add a cluster of 4 P4500 lefthands to a Cisco 2960 stack.&nbsp;</P><P>I would want to use 802.3ad for load sharing.</P><P>There&nbsp;3 VMware hosts connected to the same switch.</P><P>The VMware hosts are&nbsp;using&nbsp;EtherChannels. The only load balancing mode supported by VMware is "src-dst-ip" on the Cisco switch. This value is global for both EtherChannel and LACP.</P><P>I couldn't find any reference what the supported or recommended load balancing mode is for the lefthands when running 802.3ad</P><P>Is it OK to set it to "src-dst-ip" on the Cisco side?</P> Wed, 20 Nov 2013 14:08:17 GMT https://community.hpe.com/t5/storevirtual-storage/lacp-load-balancing-mode/m-p/6275797#M7551 IngoK 2013-11-20T14:08:17Z https://community.hpe.com/t5/storevirtual-storage/lacp-load-balancing-mode/m-p/6285811#M7688 <P><A target="_blank" href="https://community.hpe.com/t5/HP-StoreVirtual-Storage-LeftHand/NIC-Bond-setup-which-option-is-best/td-p/5681235#.UpdC9PEa3IU">http://h30499.www3.hp.com/t5/HP-StoreVirtual-Storage-LeftHand/NIC-Bond-setup-which-option-is-best/td-p/5681235#.UpdC9PEa3IU</A></P> Thu, 28 Nov 2013 13:24:27 GMT https://community.hpe.com/t5/storevirtual-storage/lacp-load-balancing-mode/m-p/6285811#M7688 TurbinYA 2013-11-28T13:24:27Z