HP VSA with hyper-v 2012

loop22 — Sat, 14 Dec 2013 17:17:46 GMT

Hi,

is it possible to have high-availibility with only 2 hyper-v hosts?

Installing windows server 2012 on two servers and on top (as vm) the VSA and configuring the fail-over cluster in windows.

Does it work? Because there is no quorum?!

Does automatic VM restart works?

Thank you!

regards

Re: HP VSA with hyper-v 2012

oikjn — Mon, 16 Dec 2013 05:46:57 GMT

yes and no... you can do a MS cluster with HA on two nodes. That requires node+disk majority. As for VSAs running a HA san on the same two servers, you will run into a problem for true HA w/ quorum. You CAN impliment a virtual FOM which would then require manual intervention to regain quorum if the "wrong" node on the san were to fail. The better solution is to have a 3rd node w/ a FOM to run to maintain quorum and ensure there is no need for human interaction to maintain quorum. The FOM is a very light weight VM, so you can find some cheap POS old server to run in a closet and run the FOM on that, or run it on your desktop computer if its win8 and you always leave it on anyway.

Short answer: for Microsoft, 2 nodes is enought, for VSA, two storage nodes are enought, but you need a 3rd FOM node running as well on cheap hardware to really count as HA.

topic Re: HP VSA with hyper-v 2012 in StoreVirtual Storage

HP VSA with hyper-v 2012

Re: HP VSA with hyper-v 2012