https://community.hpe.com/t5/storevirtual-storage/p4300-quick-restore-failure/m-p/5289433#M9328 <P>I was trying to image the SANIQ software on my P4300 node but ran into the error below</P> <P>&nbsp;Error: Invalid hardware Unit – unit type number is [225] </P> <P>I have a valid license key&nbsp; received from webware.</P> <P>I urgently need to get this node up and running.</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved&nbsp;from Storage Area Networks (SAN) (Small and Medium Business) to HP StoreVirtual Storage / LeftHand. - Hp Forum Moderator</P> Mon, 25 May 2015 06:12:26 GMT Kumdist 2015-05-25T06:12:26Z https://community.hpe.com/t5/storevirtual-storage/p4300-quick-restore-failure/m-p/5289433#M9328 <P>I was trying to image the SANIQ software on my P4300 node but ran into the error below</P> <P>&nbsp;Error: Invalid hardware Unit – unit type number is [225] </P> <P>I have a valid license key&nbsp; received from webware.</P> <P>I urgently need to get this node up and running.</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved&nbsp;from Storage Area Networks (SAN) (Small and Medium Business) to HP StoreVirtual Storage / LeftHand. - Hp Forum Moderator</P> Mon, 25 May 2015 06:12:26 GMT https://community.hpe.com/t5/storevirtual-storage/p4300-quick-restore-failure/m-p/5289433#M9328 Kumdist 2015-05-25T06:12:26Z https://community.hpe.com/t5/storevirtual-storage/p4300-quick-restore-failure/m-p/5297097#M9329 <P>The solution to this was replacing the mainboard. The mainboard with the issue doesnt have a ILo2 port. The correct one should have. After replacing the mainboard, the Restore DVD ran perfectly.</P> Thu, 11 Aug 2011 01:14:32 GMT https://community.hpe.com/t5/storevirtual-storage/p4300-quick-restore-failure/m-p/5297097#M9329 Kumdist 2011-08-11T01:14:32Z