https://community.hpe.com/t5/storevirtual-storage/vsa-p4000/m-p/1090521#M9536 How can I upgrade VSA 8.0 to VSA 8.1?<BR /> Can both version be on the same cluster? Tue, 23 Jun 2009 04:40:12 GMT Trieu Kenny 2009-06-23T04:40:12Z https://community.hpe.com/t5/storevirtual-storage/vsa-p4000/m-p/1090521#M9536 How can I upgrade VSA 8.0 to VSA 8.1?<BR /> Can both version be on the same cluster? Tue, 23 Jun 2009 04:40:12 GMT https://community.hpe.com/t5/storevirtual-storage/vsa-p4000/m-p/1090521#M9536 Trieu Kenny 2009-06-23T04:40:12Z https://community.hpe.com/t5/storevirtual-storage/vsa-p4000/m-p/1090522#M9537 You upgrade the VSA firstly by downloading the SANIQ.upgrade file. <BR /><BR />The steps are as follows.<BR /><BR />1) Upgrade the centralised management console to 8.1<BR />2) Find out which node is running the VIP and also if you have Quorum, when a node is shutdown. (Suggest using virtual manager on the node not being upgraded is enabled on it)<BR />3) Upgrade the first node which isn't running the VIP or virtual manager. Upgrading is done using the install software tab on the node.<BR />4) Once the upgrade is complete upgrade the other VSA.<BR /><BR />Always make sure you have quorum and also the DMS/MPIO software is upgraded on any servers running it. Tue, 24 Nov 2009 17:13:54 GMT https://community.hpe.com/t5/storevirtual-storage/vsa-p4000/m-p/1090522#M9537 Julian Ricketts 2009-11-24T17:13:54Z