topic Re: VMWARE SRM with EVA8400 in Operating System - VMware

VMWARE SRM with EVA8400

Pazzoide1976 — Sun, 02 Nov 2014 15:16:20 GMT

Hello I need a clarification regarding a srm configuration.

Currently I have configured a solution srm based on version 4.1 of VMware (vCenter, ESX, srm) using HP blades servers and two HP EVA8400 as storage (one at the primary site and the other to the secondary site) see attachement srm eng.jpg.

Everything works fine.

Now it was necessary to add another customer to my datacenter, and this new customer wants to have its own vCenter, its own SRM and its own cluster Vmware but want to use the same storage.

So I would like to know if the configuration that I report in attcahnment srm2 eng is a supported solution.

In a few words I would use the same storage for both customers at the primary site, not by creating two separate clusters on the same vCenter, but setting up a new Vcenter , a new SRM and a new cluster.

Thanks

P.S. This thread has been moved from VMware>General to ESX. -HP Forum Moderator

Re: VMWARE SRM with EVA8400

Jan Soska — Sun, 08 Jul 2012 12:31:59 GMT

Hello,

my sugestion is to check this with Vmware, but in my opinion this setup looks well.

Jan

Re: VMWARE SRM with EVA8400

Jags_21 — Wed, 18 Jul 2012 02:36:22 GMT

Hi,

You can configure two instances of SRM setup on the same storage, but make sure there is no violation in licensing for the protected site and also at the storage replication front.

Also you can follow the Best Practices to get the optimal performance out of it.

http://www.vmware.com/files/pdf/partners/hp/hp_EVA_vmware_SRM-4AA2-8848ENW.pdf

Some of FAQ's on SRM:

http://www.vmware.com/files/pdf/products/SRM/VMware-vCenter-Site-Recovery-Manager-FAQ.pdf

In the diagram the SRM Customer 2 (Protected site) is pointing to SRM Customer 1 (Recovery Site), I believe that could lead to misconfiguration.

Thanks,

Jagadish

-----------------
Was the post useful? Click on the white KUDOS! Star on the left side of this post.
For HP Guided Troubleshooting; http://www.hp.com/support/hpgt