topic Re: ESX4 problem on DL180 G6 in Operating System - VMware

ESX4 problem on DL180 G6

DariuszLyskoit — Mon, 15 Mar 2010 05:39:51 GMT

I have successfully deployed ESX4 on DL180 G6 machine. I have only one power supply at the moment.
My ESX server restarts every 1/2 days. I found this in my message logs:

Mar 10 19:05:03 esx1 hpasmpld[2433]: CRITICAL: System Power Supply Removed (Power Supply 1)
Mar 10 19:05:03 esx1 hpasmpld[2433]: A System Reboot has been requested by the management processor in 60 seconds.
Mar 10 19:05:03 esx1 hpasmpld[2433]: Sensor 0x80 Not Redundant FtrFlags 1 (OsHlthfncUpdateFtrRedundancy)
Mar 10 19:05:03 esx1 hpasmpld[2433]: BMC Communications Error - Attempting synchronization!
Mar 10 19:05:48 esx1 hpasmpld[2433]: The BMC has responded to reset request . . .

I tried to disable ASR (Automatic system recovery), but that not helped me.
Can someone help me fix this problem?

Re: ESX4 problem on DL180 G6

Kapil Jha — Wed, 17 Mar 2010 01:54:39 GMT

>>CRITICAL: System Power Supply Removed (Power Supply 1)

Can you make sure if your power supply is OK or u have both the power suppllies.

BR,
Kapil+

Re: ESX4 problem on DL180 G6

Kapil Jha — Wed, 17 Mar 2010 01:55:22 GMT

Shuts the system down (optionally) to avoid hardware damage. Use the HP ProLiant ROM Based Setup (System Configuration) Utility (RBSU) to control the option.

from man page.

BR,
Kapil+