Esxi HP SNMP

RossMc — Tue, 19 May 2015 17:18:46 GMT

Hey Guys,

Wondering if you could help. I am configuring a HP DL380 G7 as a stand alone Esxi 5 box. I have verified the offline bundle is installed.

I have setup esxi to forward trap alerts to an orion server we have. I can see the VMware traps but the compaq hardware traps do not show up.

I can confirm that the HP CIM information is showing up in the client. Also when i one of the power cables as a test it shows up in the client but no trap is sent.

I setup an identcal server a few weeks ago and this works with no issue. They are both on the same esxi and HP offline bundle.

The command i ran on both are -

esxcli system snmp set -c community
esxcli system snmp set -l warning
esxcli system snmp set -e yes

esxcli system snmp set --targets 10.X.X.X@162/community

Any help would be much appreciated. I feel like i am missing a step with regards to the HP mgt agent.

Thanks

topic Esxi HP SNMP in Operating System - VMware

Esxi HP SNMP