ilo5 DL360Gen10 with vmware

shang83 — Sun, 02 Dec 2018 09:58:28 GMT

I've 2 DL360Gen10 server installed with ESXi6.5 U2 VMware-ESXi-6.5.0-Update2-8294253-HPE-Gen9plus-650.U2.10.3.0.24-Jun2018. The servers comes with ilo5 firmware 1.30.

I encounter false alarm mentioning ALOM port 3 and 4 warning on the ESXi and in the vCenter. I then patch the ilo5 firmware from 1.30 to 1.37 but still it have not resolve the issue.

Anyone here encounter this issue? I've seen the temporary resolution is to downgrade the firmware to 1.20.

I've also log case to HPE but they have not come out with a solution.

Re: ilo5 DL360Gen10 with vmware

RaviTyagi — Wed, 05 Dec 2018 00:28:09 GMT

Hello ,

Please find below the information for the same .

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00053955en_us

Multiple hardware sensors status shows as unknown and absent hardware's status shows warning =>(https://kb.vmware.com/s/article/53134)

As per the above mentioned document .

Resolution:This warning does not have any impact on production and can be safely ignored.

Workaround

To work around this issue, downgrade the HP ILO 5 firmware version 1.30 to 1.20.

Disclaimer: One or more of the links above may take you outside the Hewlett-Packard Enterprise Web site, HPE does not control and is not responsible for information outside of the HPE Web site. Third-party links are provided to help you find the support you need. This information is subject to change without notice. We would be unable to assure the accuracy of this third-party information. The software manufacturer will be able to provide support for this third-party software.

Data integrity is customer responsibility. HPE recommends to have data backup frequently and before performing any activity so that it can be restored during disaster recovery.

Regards,

RRT

I am an HPE Employee

topic ilo5 DL360Gen10 with vmware in Operating System - VMware

ilo5 DL360Gen10 with vmware

Re: ilo5 DL360Gen10 with vmware