vsphere 7 - fault tolerance config error.

Thanks1 — Wed, 27 Jul 2022 11:34:24 GMT

Hi,

I am facing this issue concerning the configuration of fault tolerance: "Cannot power on the Fault Tolerance Secondary VM for virtual machine."

I am doing this configuration using:

2 servers DL380 Gen10 with processor Intel(R) Xeon(R) Silver 4110 and vpshere 7 enterprise plus

Can you please help find a solution?

For more details, please see below:

Start Fault Tolerance Secondary VM xxxxxxxxx Cannot power on the Fault Tolerance Secondary VM for virtual machine xxxxxx. Refer to the errors list for details.Disabling Fault Tolerance protection for VMSystem29 ms07/19/2022, 6:01:08 PM07/19/2022.

Beginning of Expandable row content Screen reader table commands may not work for viewing expanded content, please use your screen reader's browse mode to read the content exposed by this button

Task Name

Start Fault Tolerance Secondary VM

Status

Cannot power on the Fault Tolerance Secondary VM for virtual machine SVR-TEST01-FT. Refer to the errors list for details.

Initiator

System

Target: xxxxxxxx

Error stack:

Host xxxxxxxxx. has some Fault Tolerance issues for virtual machine . Refer to the errors list for details.

A general system error occurred: Launch failure

The VM failed to resume on the destination during early power on.

Module FTCpt power on failed.

The VM failed to resume on the destination during early power on.

Module FTCpt power on failed.

No suitable host can be found to place the Fault Tolerance Secondary VM for virtual machine xxxxxxxx.

topic Re: vsphere 7 - fault tolerance config error. in Operating System - VMware

vsphere 7 - fault tolerance config error.

Re: vsphere 7 - fault tolerance config error.