topic Query: With a second array on DL380 gen8 vsphere does not boot anymore in Operating System - VMware

With a second array on DL380 gen8 vsphere does not boot anymore

werner.zeller — Thu, 15 Jun 2023 01:54:27 GMT

Hi, I have a older Dl380 gen8 server for tesing, not hcl compatible. I did install one array on the P420i for booting und installed vSphere 6.x 7.x and 8u1, it does boot, it is working. After that I created a new Array (B) with 6 x 900GB disk with Raid5, does not finish boot anymore. After creating this new Array the esxi 8u1 (or7.x) does stop at the end at storage-path-claim. When I delete the Array B it is booting again as normal! I did not found something for that hang... I think many of us have a older server hardware for testing with the same problem..

Thanks for your help!

Best regards

werner

Query: With a second array on DL380 gen8 vsphere does not boot anymore

support_s — Thu, 01 Jun 2023 11:32:20 GMT

System recommended content:

1. HPE ProLiant DL380 Gen8 Server - FIRMWARE UPGRADE RECOMMENDED for Smart Array P420i And HP Smart Storage Administrator

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: With a second array on DL380 gen8 vsphere does not boot anymore

Bunsol — Thu, 08 Jun 2023 04:01:37 GMT

In Smart storage administrator you will have an option Set Bootable Logical Drive/Volume. Select the appropriate voluem where you want the server to boot from. We however do not recommend dual operating system installation.