topic Re: Vmware Integration in Operating System - VMware

Vmware Integration

RMC_2 — Tue, 18 Aug 2009 14:37:25 GMT

Hi all,

A client of mine has the following infrastructure:

3 nodes ESX cluster plus a vCenter, I've managed to successfully install DP/VMware integration in one of the ESX nodes and in the vCenter...having said that here're my questions:

- I don't see any kind of "vmware integration" stuff when I try to create a backup, only filesystem. Should I see something like Oracle Integration?
- I can't browse vmfs folder in the ESX server

I've been ITRCing and googleing about this issues but with no satisfactory answers.

thnx in advance

R.

Re: Vmware Integration

Shoghi Martinez G. — Tue, 18 Aug 2009 18:33:59 GMT

Hi, use this guide:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01540177/c01540177.pdf

you never assign point to your answers do not forget to read this: http://forums11.itrc.hp.com/service/forums/helptips.do?#33

HTH
Shoghi

Re: Vmware Integration

RMC_2 — Tue, 18 Aug 2009 19:43:32 GMT

Shoghi, thnx for the advice...but,

I still can't see any VM or browse /vmfs in the ESX server, I've been reading the Integration Manual for 6.1 (sorry I omitted that before), I'm backing up the ESX and the vCenter as a F/S, but I can't get to configure any of the VM's...

any thought???

maybe licensing?

R.

Re: Vmware Integration

Matthew Pearce — Wed, 19 Aug 2009 05:11:16 GMT

Under the "backup specifications", do you have folder called VMware? I'm using 6.1 on my cell manager, and I have that option, similar to oracle integration backup. It wasn't there in 5.5, I'm not sure about 6.0. So yes, this is where I create the VM integration backup specs. Installing the disk agent and VM integration on the ESX host is correct.

Re: Vmware Integration

RMC_2 — Wed, 19 Aug 2009 07:05:17 GMT

Matthew,

No VMware Integration found!! That's one of my problems. I installed from the manual but it seems that something is wrong...Did you apply some "special" installation procedure?

thnx for the reply...

R.

Re: Vmware Integration

Georges Esteves — Wed, 19 Aug 2009 07:21:49 GMT

hi,

if you select your ESX server and V-center client in DP GUI, is the VMware integration listed in the DP agents installed ??

if not, i suggest you to delete these clients form DP GUI, without desinstalling DP software, then import them again in the DP cell.

georges.

Re: Vmware Integration

RMC_2 — Wed, 19 Aug 2009 07:42:25 GMT

Georges,

VMware Integration is installed in both machines...weird huh?...

Re: Vmware Integration

RMC_2 — Wed, 19 Aug 2009 07:56:46 GMT

here's my cell_info

-host "ggamma" -os "gpl i686 linux-2.4.21-57.ELvmnix" -core A.06.10 -integ A.06.10 -da A.06.10 -ma A.06.10 -vmware A.06.10
-host "vcadmacsb" -os "microsoft i386 wNT-5.0-S on microsoft i386 wNT-5.2-S" -core A.06.10 -integ A.06.10 -da A.06.10 -ma A.06.10 -vmware A.06.10

Installation on ESX...
[root@ggamma root]# rpm -qa |grep OB
OB2-CORE-A.06.10-1
OB2-MA-A.06.10-1
OB2-INTEG-A.06.10-1
OB2-DA-A.06.10-1
OB2-VMW-A.06.10-1

Re: Vmware Integration

Georges Esteves — Wed, 19 Aug 2009 08:00:42 GMT

have you take a look at the debug.log file on cell and clients for any error message about VMWare integration ??

Georges.

Re: Vmware Integration

RMC_2 — Wed, 19 Aug 2009 12:15:36 GMT

Georges,

some errors...not very straightforward though...

In ESX:
08/18/2009 03:06:03 PM INET.3182.0 ["inet/inet.c /main/hsl_dp61/19":2861] A.06.
10 bPHSS_39510/PHSS_39511/DPSOL_00370/DPLNX_00076
mkdir /opt/omni
Command not allowed! Aborting

08/18/2009 03:06:05 PM INET.3296.0 ["inet/inet.c /main/hsl_dp61/19":2861] A.06.
10 bPHSS_39510/PHSS_39511/DPSOL_00370/DPLNX_00076
mkdir /opt/omni
Command not allowed! Aborting

08/18/2009 03:06:06 PM INET.3410.0 ["inet/inet.c /main/hsl_dp61/19":2861] A.06.
10 bPHSS_39510/PHSS_39511/DPSOL_00370/DPLNX_00076
mkdir /opt/omni
Command not allowed! Aborting

What does "Command not allowed" point to? Ok, can't create /opt/omni...but why? That directory already exists....

In vCenter...

08/18/09 14:42:40 BMA.7400.0 ["lib/ipc/ipc.c /main/hsl_dp61/dp61_patch/3":3365]
A.06.10 bPHSS_39518/PHSS_39519/DPSOL_00374/DPLNX_00080
Releasing handle 3 of unknown type.

08/18/09 14:44:21 BMA.7400.0 ["lib/ipc/ipc.c /main/hsl_dp61/dp61_patch/3":3365]
A.06.10 bPHSS_39518/PHSS_39519/DPSOL_00374/DPLNX_00080
Releasing handle 3 of unknown type.

08/18/09 14:46:02 BMA.7400.0 ["lib/ipc/ipc.c /main/hsl_dp61/dp61_patch/3":3365]
A.06.10 bPHSS_39518/PHSS_39519/DPSOL_00374/DPLNX_00080
Releasing handle 3 of unknown type.

R.

:(

Re: Vmware Integration

Georges Esteves — Wed, 19 Aug 2009 12:25:48 GMT

did you try to delete and import back the ESX and V-center clients in DP ??

If it doesn't work, try to uninstall and install again DP on your ESX and V-center

Georges.

Re: Vmware Integration

RMC_2 — Wed, 19 Aug 2009 12:31:11 GMT

mmmhhh....about three times in ESX and two in vCenter...

Is it possible that the issue has something to do with licensing? in omnicc don't see any VMware related license...

Re: Vmware Integration

Georges Esteves — Wed, 19 Aug 2009 12:36:11 GMT

Vmware integration needs one "Online for windows/linux" licence for each ESX,V-center and Proxy backup, there is no "VMware integration" licence.

Licences are no needed to configure, but only to start backups, so this is no a licence related problem.

My question could sounds like stupid, but are you sure that your Cell manager is DP 6.1 and not lower ?

Georges.

Re: Vmware Integration

RMC_2 — Wed, 19 Aug 2009 12:54:03 GMT

Positively sure:

root@BCKDP:/:omnicc -version
HP Data Protector A.06.10: OMNICC, internal build PHSS_39510/PHSS_39511/DPSOL_00370/DPLNX_00076, built on Tue Mar 17 02:47:31 2009

I'm getting a little frustrated...

R.

ps. thnx to be so kind Georges, believe it or not you're helping me a lot....

Re: Vmware Integration

RMC_2 — Thu, 20 Aug 2009 12:23:28 GMT

No one else has something to say? :(

OK, I'got some new info, VMware platform isn't seeing the backup zone (till' next weekend)...which explains why I can't browse /vmfs... but still don't see VMware Integration under "Backup Specifications" could the zoning issue be the cause of the problem?

R.

Re: Vmware Integration

RMC_2 — Thu, 20 Aug 2009 12:32:39 GMT

Other thought,

being a cluster platform...is necessary to integrate all the machines involved on the solution?

R.

Re: Vmware Integration

Uwe Zessin — Thu, 20 Aug 2009 13:11:24 GMT

I've installed the VMware Integration on one ESX server:
[root@esxc root]# rpm -qa |grep OB
OB2-VMW-A.06.10-1
OB2-CORE-A.06.10-1
OB2-DA-A.06.10-1
[root@esxc root]#
, the Vcenter Server and the (Windows) Proxy server. I can see:
[-] Backup
.... [-] Backup Specifications
........ [+] Filesystem
........ [+] VMware
.... [+] Templates

Have you already seen the document
""HP Data Protector 6.1 software VMware Integration Installation Best Practice
- c01768750"" ?

Re: Vmware Integration

RMC_2 — Thu, 20 Aug 2009 13:49:25 GMT

Uwe, thnx for the reply...

...but, I've seen that document, and as a matter of fact, every doc that comes with DP 6.1, and none explains what is causing this particular issue...Installation was done from the c01768750.pdf...I've been reading also the Troubleshooting, and nothing yet....

R.

Re: Vmware Integration

Uwe Zessin — Thu, 20 Aug 2009 13:53:49 GMT

Are you sure? According to my tracking, it was create in june 2009 and did not come with DP 6.1.

Did you mean this instead?
HP Data Protector A.06.10 Integration Guide for Vmware, Sybase, NNM, and Network Data Management Protocol Server
B6960-96044 (November 2008) [1ed] - c01631241

Re: Vmware Integration

RMC_2 — Thu, 20 Aug 2009 14:07:28 GMT

This is the document I have, "HP Data Protector 6.1 software
VMware Integration Installation Best Practice"

Are we talking about the same one?

thnx

R.