No Alert Sent When Disk Failed

HTH_1 — Wed, 21 Oct 2009 21:24:02 GMT

I was able to install HP agents on an ESX 3.5 server running on a DL380 G3. From the HP System Management Page I can send an SNMP trap to an HIM server; I can also send trap test with this CLI:
vicfg-snmp.pl --server --username --password --test. So SNMP is working. However I cannot find where to set notifications for hw failure. In a windows system I select Physical in Settings>SNMP Webagent>SNMP & Agent Settings>SNMP Agent Configuration as in the attached then I get alerts when a disk fails. In ESX where can I change the setting for this? Thanks.

Re: No Alert Sent When Disk Failed

Maxim Revutskiy — Thu, 10 Dec 2009 07:50:25 GMT

in /etc/snmp/snmpd.conf
trapsink server.address communityname

Re: No Alert Sent When Disk Failed

HTH_1 — Sat, 12 Dec 2009 00:45:17 GMT

Thx. It works now.

topic Re: No Alert Sent When Disk Failed in Operating System - VMware

No Alert Sent When Disk Failed

Re: No Alert Sent When Disk Failed

Re: No Alert Sent When Disk Failed