https://community.hpe.com/t5/operating-system-vmware/virtual-backup-server/m-p/4720198#M939 Hi all<BR /><BR />I would like to know if it is possibile to connect a tape directly to a esx machine.<BR />this is the configuration: two ML370 g5 server, running esx 4.1, sharing a msa storage, configured in HA. Both servers have a scsi ultrium 232 connected, with a u320 scsi controller. I would like to let a win2008 virtual machine use the tape, as in vmware KB1016407. Possible?<BR /><BR />thanks<BR /> Wed, 01 Dec 2010 11:06:05 GMT Andrea Rossi 2010-12-01T11:06:05Z https://community.hpe.com/t5/operating-system-vmware/virtual-backup-server/m-p/4720198#M939 Hi all<BR /><BR />I would like to know if it is possibile to connect a tape directly to a esx machine.<BR />this is the configuration: two ML370 g5 server, running esx 4.1, sharing a msa storage, configured in HA. Both servers have a scsi ultrium 232 connected, with a u320 scsi controller. I would like to let a win2008 virtual machine use the tape, as in vmware KB1016407. Possible?<BR /><BR />thanks<BR /> Wed, 01 Dec 2010 11:06:05 GMT https://community.hpe.com/t5/operating-system-vmware/virtual-backup-server/m-p/4720198#M939 Andrea Rossi 2010-12-01T11:06:05Z https://community.hpe.com/t5/operating-system-vmware/virtual-backup-server/m-p/4720199#M940 Hi,<BR /><BR />vmware supports tape drives connected through an adaptec controller only, check what type of SCSI controller you have on the server and also is it an standalone tape drive or an library<BR /><BR />if it is an library then it will support on ESX 4.x (see Page 20 of the Virtual Machine Backup Guide for further information), if it is an standalone then it is not supported you can refer the same KB: 1016407<BR /><BR />"Note: <BR />As of vSphere 4.0, ESX only supports connectivity to parallel SCSI tape libraries."<BR /><BR />regards Wed, 08 Dec 2010 12:38:02 GMT https://community.hpe.com/t5/operating-system-vmware/virtual-backup-server/m-p/4720199#M940 Jags_21 2010-12-08T12:38:02Z