EVA Configuration backup

Aneesh-Augustin — Sat, 03 Mar 2012 18:40:52 GMT

I i tried to take the backup of EVA using SSSU by typing the command "CAPTURE CONFIGURATION'" and redirecting to a file name but while i am opening this file i cant see any configuration only i can see the below line... is the configuration is saving to some other location rather than the default folder

**********************

CAPTURE CONFIGURATION may take awhile. Do not modify configuration
until command is complete.

CAPTURE CONFIGURATION Step1A complete and successful

CAPTURE CONFIGURATION Step1B complete and successful

CAPTURE CONFIGURATION Step1C complete and successful

CAPTURE CONFIGURATION Step2 complete and successful

CAPTURE CONFIGURATION Step3 complete and successful

Please give suggestions

Re: EVA Configuration backup

hvhari — Sun, 04 Mar 2012 12:27:03 GMT

Hi,

Please check the correct syntax of the command.

The scripts output to the console unless you specify a file name. The file name is appended with
_StepXX. XX is the restore step name, which is 1A, 1B, 1C, 2, or 3. For example, if you specify
CAPTURE CONFIGURATION newyear.txt, SSSU creates the files newyear_Step1A.txt,newyear_Step1B.txt, newyear_Step1C.txt, newyear_Step2.txt, and
newyear_Step3.txt.

Details in reference guide at http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02493404/c02493404.pdf

topic EVA Configuration backup in Storage Software

EVA Configuration backup

Re: EVA Configuration backup