Using sssu on Linux ia32 to configure EVA5000

Catalin Tache_1 — Tue, 29 Jul 2003 12:10:19 GMT

Hi,

I have a EVA500 storage and some Linux boxes running RedHat A.S. 2.1 connected to it.

On one of this servers is installed the packet ENTsssu-5.72.rpm which cames with Linux for enterprise virtual array 5000 v3.0 (may2003).

On the management appliance server is running command view eva 3.0.0.386.

When I try to select a storage system I get invalid username or password error. But the username and password are good, I've tested them through the web interface.

# sssu "file com"

SSSU Build 72 for EVA Version 3

NoSystemSelected> SELECT MANAGER 1.1.1.1 USERNAME=xyz PASSWORD=xyz
NoSystemSelected> SHOW SYSTEM

Error: EMClientAPITNG error ->
EMCLIENTAPI_PERMISSIONDENIED_ERROR : Invalid username or password.

Any ideas?
Thanx

Re: Using sssu on Linux ia32 to configure EVA5000

Sheldon Smith — Wed, 30 Jul 2003 12:33:36 GMT

SSSU connects to the appliance using the WBEM password. If we are talking about a new Storage Appliance, the default password is *not* adminXXXXXX (W2K password), but the Web-Based Mgmt password: "administrator".

And with the installation of command view eva, it took me days to figure out how to change it:
When you first connect to the appliance, the WBEM Device Home page is displayed. In the upper left it shows "Login Account" followed by a username. Click on the username.
On the account login screen, click on the "changed" link.

topic Using sssu on Linux ia32 to configure EVA5000 in Storage Software

Using sssu on Linux ia32 to configure EVA5000

Re: Using sssu on Linux ia32 to configure EVA5000