topic Re: EVA Platform Kit - SSSU Config Help! in Storage Software

EVA Platform Kit - SSSU Config Help!

Zinky — Mon, 17 Feb 2014 06:01:40 GMT

I've installed SSSU on an HP-UX system in the home of doing command line management of our EVAs. When trying to connect to the SMA via the "select manager ... " and eventually "show system" commands, SSSU just complains of invalid username/password. I am sure I am providing the right San Management Appliance (SMA)username and password since I can connect via web.

Is there any additional configuration that needs to be done on the WIndows SMA/Command View side of things? The SSSU reference guide just mentions that the "password" is set on the appliance..

Anyone?

P.S. This thread has been moved from Storage Area Networks (SAN) (Enterprise) to HP Storage System Scripting Utility (SSSU). - Hp Forum MOderator

Re: EVA Platform Kit - SSSU Config Help!

Stephen Kebbell — Thu, 09 Sep 2004 07:33:29 GMT

Hi Nelson,

which username/password are you using? The one you use to log onto the appliance? (e.g. administrator/admin31K153) SSSU wants the password for Command View EVA, which uses the login details for the Web Management agents (default is administrator/administrator). When you're browsing normally on the appliance you never get asked for this. You just use the normal appliance login. But if you're using SSSU or configuring the proxy device for OVSAM, then you need it.

Hope this helps.
Regards,
Stephen

Re: EVA Platform Kit - SSSU Config Help!

Zinky — Thu, 09 Sep 2004 07:34:51 GMT

Thanks..
I figured that out as well..

Re: EVA Platform Kit - SSSU Config Help!

Zinky — Thu, 09 Sep 2004 07:35:23 GMT

Found the clue in navigating the SMA GUI..