topic Re: SSSU commands hang in Storage Software

SSSU commands hang

Gregory janke_1 — Mon, 17 Feb 2014 07:37:39 GMT

VMS V7.3-2 system.
$ mc sssu
sel man nnn.nnn.nnn.nnn user=ausername pass=apassword
sel cell SomCel

Question: Any command issued after sel cell will just hang until I exit out of the utility. Has anyone encountered this, and if so, what was the remedy.

thanks,
Greg

P.S. This thread has been moved to HP Storage System Scripting Utility (SSSU). - Hp Forum Moderator

Re: SSSU commands hang

Uwe Zessin — Thu, 15 Dec 2005 13:37:06 GMT

Does "SELECT CELL" come back with a prompt?

What happens if you replace "SELECT CELL..." with the "SHOW CELL FULL" command?

What version of SSSU are you using and what version of CV-EVA is installed on the management server?

Re: SSSU commands hang

Gregory janke_1 — Thu, 15 Dec 2005 13:45:19 GMT

sel cell comes back with the correct cell prompt.

If I issue the show cell full inplace of the sel cell, I do not receive the prompt back.

SSSU for HP StorageWorks Command View EVA 4.00 [v4.0.18]

I'll send the CV version in a bit.

thanks

Re: SSSU commands hang

Gregory janke_1 — Thu, 15 Dec 2005 14:06:27 GMT

and the CV version on mngt appliance is 4.1.1

Re: SSSU commands hang

Uwe Zessin — Thu, 15 Dec 2005 14:09:53 GMT

In that case I would upgrade SSSU first:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=471497&prodNameId=1114414&swEnvOID=1094&swLang=13&mode=2&taskId=135&swItem=co-36332-1

Re: SSSU commands hang

Cem Tugrul — Mon, 19 Dec 2005 06:59:33 GMT

Hi Greg,

also it would be better to have a such kind
of document

Good Luck,

Re: SSSU commands hang

Uwe Zessin — Mon, 19 Dec 2005 07:53:28 GMT

I suggest a current revision of the manual:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00500912/c00500912.pdf

Re: SSSU commands hang

Cem Tugrul — Mon, 19 Dec 2005 10:16:53 GMT

Hey Uwe,
thank's for the fresh link,i also updated
mine...
:-)